User Manual
6 Nektar Pacer User Guide www.nektartech.com
MIDI Output Jack
Connect external MIDI equipment.
Can be used as USB MIDI interface as
well as for direct control - or both.
Cable Tie
Tie your USB or PSU cable.
Unscrew with screwdriver and
tighten again for secure t.
Expression Pedal sockets 1 & 2
Standard expression pedals can be con-
nected for additional real-time control.
USB Connector
Connect to USB host/computer.
Unit powered via USB.
Footswitch sockets 2/4 and 1/3
2 TRS 1/4” jack sockets allow connection
of up to 4 external footswitch pedals.
Pacer Functional Overview
Power Supply
Power supply socket (PSU
optional) 9v 600mA, center
negative, 2.1mm barrel con-
nector.
Power On/O
Preset Switch
Press and hold for 2 seconds, then select a preset using the switches,
by rst selecting bank A/B/C/D followed by preset number 1-6.
[Preset] is also the back button when navigating Pacer menus.
Switches A-D
In factory presets, assignments for these 4 swiches are A: Track preset (for DAW control), B: Transport preset (for DAW control), C: Load previous
preset, D: Load next preset. Each of the switches can be congured to send any other function or MIDI message.