User Manual

www.nektartech.com Nektar Pacer User Guide 17
Expression Pedal
The default relay behavior can be set globally in this menu.
• Move the [Data Encoder] until you see “EXPDL“ in the display and press the [Data Encoder] to select the menu.
• Move the [Data Encoder] and choose either 1=Expression pedal 1 or 2=Expression pedal 2, and then press the [Data Encoder] to
select.
• The display now reads “MODE”. Move the [Data Encoder] to select on of the options listed in the below chart.
• Press [Data Encoder] to set and revert back to the menu where you can select either expression pedal 1 or 2.
• To return to the Global menu either press [Preset] or select “Back” using the [Data Encoder]
Mode Option Expression pedal type
1
2
3
Relay Behavior
The default relay behavior can be set globally in this menu.
• Move the [Data Encoder] until you see “RLY“ in the display and press the [Data Encoder] to select the menu.
• Press the external footswitch that you want to change setting for, and then press the [Data Encoder] to select.
• The display now reads “MODE”. Move the [Data Encoder] to select on of the options listed in the below chart.
• Press [Data Encoder] to set and revert to the Global menu
Mode Option Relay Behavior
1 Momentary, normally open
2 Momentary, normally closed
3 Latching
Patch Up/Down Function
The Track and Transport presets used for Nektar DAW Integration control use switches C and D to select previous or next patch in your
DAW. Some plugins however don’t respond to these messages and instead require you to send a MIDI program message. This global
menu allows you to select one or the other option.
• Move the [Data Encoder] until you see “PTCHF” in the display and press the [Data Encoder] to select the menu.
• Move the [Data Encoder] to select either “PRG” or “DAW”. PRG=MIDI Program Change. DAW=DAW Patch Change
• Press [Data Encoder] to set and revert to the Global menu