User Manual

www.nektartech.com Nektar Pacer User Guide 11
Type
Move the [Data Encoder] until you see „TYPE“ in the display. Type is the menu where you specify what kind of message or action the select-
ed step will send or execute.
• Press [Data Encoder] to select the menu. The type setting for the currently selected step is displayed in the display (for example CC
TOG or PGBNK etc).
• The selected step is illuminated red. Press any other switch illuminated white to select a different step.
• Move the [Data Encoder] to select the type you need for the current step (see chart below).
• Press [Data Encoder] when you are done. The display now reads „TYPE“ which means you are back at the top menu level.
Type Data Settings
The type selelected for the current step determines what options are available. The chart below shows the types available as well as the
setting options for each in column‘s Data 1-3 as well as MIDI Channel if applicable.
Type Display Abb. Data 1 Data 2 Data 3 MIDI Channel
MIDI CC Toggle CCTOG MIDI CC (0-127) Press 1 (0-127) Press 2 (0-127) 0=Global, 1-16
MIDI CC Trigger CCTRG MIDI CC (0-127) Down (0-127) Up (0-127) 0=Global, 1-16
MIDI CC Step CCSTP MIDI CC (0-127) Start (0-127) End (0-127) 0=Global, 1-16
MIDI Note NT Note (0-127) Velocity (0-127) n/a 0=Global, 1-16
MIDI Note Toggle NTTOG Note (0-127) Velocity (0-127) n/a 0=Global, 1-16
MIDI Program & Bank PGBNK Program (0-127) Bank LSB (0-127) Bank MSB (0-127) 0=Global, 1-16
MIDI Program Step PGSTP Start (0-127) End (0-127) n/a 0=Global, 1-16
MIDI NRPN Coarse NRPNC Value (0-127) LSB (0-127) MSB (0-127) 0=Global, 1-16
MIDI NRPN Fine NRPNF Value (0-127) LSB (0-127) MSB (0-127) 0=Global, 1-16
MIDI Machine Control MMC Device ID (0-127) Command (0-127) n/a n/a
Pacer Relay Outputs RELAY Mode (nO/nC/Lt)* Select (1-4) n/a n/a
Pacer Preset PRSET Target (A1-D6, Trc, Trn) n/a n/a n/a
Pacer Preset Inc/Dec PR-+ Direction (Inc/Dec) n/a n/a n/a
Control Step Select STEP Target (A-D, 1-6, FS1-4,
EXP 1-2)
Step (1-6) n/a n/a
Control Step Inc/Dec STP-+ Target (A-D, 1-6, FS1-4,
EXP 1-2)
Direction (Inc/Dec) n/a n/a
Nektar DAW Control DAW Function (Solo, mute
etc)
n/a n/a n/a
O OFF n/a n/a n/a n/a
Example:
• With type set to MIDI CC Trigger (CCTRG) for the current step, move the [Data Encoder].
• When the display reads “CC“, press the [Data Encoder].
• Move the [Data Encoder] to select the MIDI CC number from 0-127, you want the step to send.
• Press [Data Encoder] and move it to “DWN”.
• Press [Data Encoder] and set the Down value by moving the [Data Encoder]. This is the value sent when the control is pressed.
• Press [Data Encoder] and move it to “UP”.
• Press the [Data Encoder] and set the Up value by moving the [Data Encoder. This is the value sent when the control is released.
• Press the [Data Encoder] to accept this last change.