User Manual

6 Using Panorama with Reaper www.nektartech.com
Reaper Mixer Control
Navigating Tracks & Channels
Now create an additional 8 tracks in the Reaper song so we have a total of 16 channels to navigate.
Use the [Track+] button to navigate to channel 14.
That's a lot of button presses but thankfully there is a quicker way. Press and hold the [Shift] button on Panorama, then press
the [Track-] button. This button combination activates the second menu layer on Panorama (in this case [<Bank]) so we now
view channels 1-8 again. Make sure the LED buttons are assigned to Select, and press the LED button that corresponds to
channel 6.
Next press [Shift] and hold it while pressing the LED button that corresponds to channel
3. The channels displayed and controlled by Panorama will now be 3-10 as shown on
the image.
You have now learned how to navigate Reaper tracks from Panorama using 4 different
methods:
 [Track-] and [Track+] buttons go to previous or next track in the Reaper sequencer
 [Shift]+[<Bank] or [Bank>] bank over the 8 channels you operate in Reaper
 Pressing the [LED buttons] when assigned to "Select" enables quick channel selection within the bank of 8 channels you
are currently controlling from Panorama
 [Shift]+[LED button] assigns the group of 8 channels you control from Panorama from the channel corresponding to the
[LED button] you pressed
You can expand/collapse the Reaper mixer by pressing the [View] button in Mixer mode.