User Manual

2 Using Panorama with Reaper www.nektartech.com
Reaper Integration Setup and Configuration
The Panorama Reaper Integration is compatible with the latest version of Reaper. These instructions assume you have one of
these programs installed running on either Windows (Vista, 7, 8 or higher) or Mac OS X.
Installation
Here are the steps you need to go through to get Reaper up and running with your Panorama:
 If you have just completed a fresh install of Reaper, make sure to first open Reaper once and quit again, before
installing the Panorama Reaper support files.
 Run the downloaded installer and follow the on-screen instructions
 Plug-in your Panorama and make sure it’s switched on (if you didn’t do so already)
 Launch Reaper and go to Options/Preferences/Control Surfaces
 Click “Add”, then in the pop-up window, select your Panorama model in the “Control surface mode” list. As long as
your Panorama is connected and switched on, Reaper should automatically detect the correct ports. Click “Ok”
 Go to Preferences/Audio/MIDI Devices next and enable the port named Panorama P1 (or P4/P6). The mode should
be “Enable+Control”. The other Panorama ports should remain disabled in this window.
 Click “Apply” and OK
That’s it, setup is now complete and you can move on to the fun part, learning how it all works.