User Manual

14 Using Panorama with Reaper www.nektartech.com
Transport Mode
Transport mode helps you to navigate and build up your song composition from Panorama. As explained earlier, the transport
buttons are available in any mode but the dedicated Transport Mode provides access to extra tools that will make capturing
ideas, beat creation and overdubbing easier.
Transport Home Page
Press the [Transport] button to enter Transport mode. Transport mode provides the
visual feedback you need to know where you are in your project. Below the info-bar the
large font readout shows the current SPP location which updates as you play the
project.
Below the SPP readout you see the position of the Left and Right locators (or start time
and end time of time selection). You can set the locators to the current song position by
pressing [Shift]+[Goto L] and [Shift]+[Goto R]
In addition, the following 8 boxes in the display show what each of 2x4 rows of encoders are assigned to control:
The display buttons are assigned to the following functions:
Getting to grips with Transport mode may take a little bit of practice but it will pay off as you learn how to navigate your
project without having to reach for the computer mouse.
Panorama P1 Foot Switch
The Panorama P1 also has a foot switch input jack. If you have a foot switch connected, you can select what it controls from
the 5th display button labeled "Pedal".
Press the Pedal button and use the Data Control to select the assignment you want: Play, Auto Punch in/out, Record, Set loop
in/out, Loop on/off, Goto L and Goto R.
Tempo Zoom <SPP>
Change the Reaper tempo. Horizontal zoom control
for Reapers sequencer
time line
Moves the Song Position
Pointer forward or
backward from the
current location
L Loop R Loop Playrate
Controls the position of the left
locator/start time of time selec-
tion
Controls the position of
the right locator/end time
of time selection
Change the Reaper
Playback rate parameter
NewTrk]: Create a new track
[Split]: Splits a selected part in the Reaper sequencer
at the SPP location
[TmpoEnv]: Toggles the Tempo Envelope in and out of view
in Reaper
[RsetPR]: Reset Playback rate to zero