User Guide

www.nektartech.com Nektar Impact LX25+ User Guide 21
USB Port Setup (A4)
Impact LX25+ has one physical USB port however there are 2 virtual ports as you may have discovered during the MIDI setup of your
music software. The additional virtual port is used by the Impact DAW software to handle communication with your DAW. You only need to
change the USB Port Setup setting if the Impact LX25+ setup instructions for your DAW specifically advises that this should be done.
Factory Restore
If you need to restore factory settings for example if you by mistake managed to change the assignments needed for DAW integration files,
here is how you do that.
• Make sure your Impact LX25+ is switched off
• Press the [Octave up]+[Octave down]
• Switch your Impact LX25+ on, while holding the Octave buttons
• Release the Octave buttons after 2 seconds