User Manual

6
[e-mail]
Flight Trimming
Press down the right remote
stick to enter fine-trimming,
press the right stick up/
down to backward/forward
trimming.
Press down the right remote
stick to enter fine-trimming,
press the right stick left/
right to rightward/leftward
trimming.
Altitude Hold / Hover
This is one of the default setting in the drone. When you release the Left Control Stick after
the ascending/descending action, the drone will hover at the current flight height. For a stable
flight, press the trim buttons to adjust accordingly.
Headless Mode
Press the Headless button to activate the function. In this mode, the drone will fly following
the direction of the Right Control Stick regardless of the position of your drone’s head or
the tail. The LED on the drone will flash and there is beeping sound from the remote. Press
the same button again to exit this mode.
Standard Mode Headless Mode