User's Manual

-20-
 Input method settings: You can set input method through this function.
 Auto power on/off: Set the time when the mobile phone will be automatically powered on or off.
 Power saving mode: Show the remaining battery level and turn on/off power saving mode.
 Restore factory settings: Use this function to restore factory settings. The initial password is 1122.
Display
Users can access this item to set wallpaper, backlight and animation effect, etc.
Security
 PIN: The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being
used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If
PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The
SIM card will be locked if you input wrong PIN code for three times
 Modify PIN2: You can modify PIN2 through this function.
 Phone locked: The function enables you to lock/unlock the phone. Enter password to switch on or off
the phone. Password is required when the phone is locked. The initial password is 1122.
 Modify the cell phone password: to change phone password.
 Privacy: the initial password is 1122. After accessing this function, you can select some items. Once an
item is selected, you need to input correct password whenever you want to enter these items to perform
further operations.
 Fixed dial number: You can select to turn on/off this function and set fixed dialing number through this
function.