Operation Manual

38Chapter 6 . Camera and Photos
PRO
In PRO (professional) mode, you can adjust the parameters manually.
Tap
on the screen or swipe right on the screen and choose PRO mode. Tap to view the details about
Pro mode.
• Select metering mode: Tap
to select a metering mode. You can select Center-weighted metering,
Average metering or Spot metering.
• Adjust image parameters: Tap
. You can adjust the Hue, Saturation, Brightness and Contrast to make
your image look more vivid.
• Adjust the ISO: Tap ISO and drag the slider to set the ISO. The ISO determines the camera’s sensitivity to
light. Increasing the ISO will create a brighter image, but there will be a noticeable increase in noise.
• Adjust the shutter speed: Tap S and drag the slider to set the shutter speed. By default, the shutter speed
is set to Auto.
• Set the white balance: Tap AWB and drag the slider to select a white balance. You can choose from filament
lamp, fluorescent lamp, daylight, cloudy and shadows. You can also adjust the color temperature.
• Adjust the exposure compensation: Tap EV and drag the slider to adjust the exposure compensation. This
setting changes the brightness of the image. Touch and hold a setting to lock it.
• Change the focus mode: Tap AF and drag the slider to select a focus mode. You can choose from AF and
MF (manual focus). Touch and hold an area of the screen to lock the focus.
VIDEO
Tap on the screen or swipe right on the screen and choose VIDEO mode. See Record a video for details.
TIME-LAPSE
Make an accelerated video of a slow-changing scene. For example, you can record the opening of a flower or
the movement of clouds.
1. Tap
on the screen or swipe right on the screen and choose TIME-LAPSE. Tap to view the details
about TIME-LAPSE mode.
2. Tap
to switch between the front camera and rear camera.
3. Tap
ON
to display flash mode’s three options and select a flash mode. Tap
720P
to set the pixel as 1080P, 720P
or 480P, and tap
1s
to set time-lapse as 1s, 2s, 5s or 10s.
4. Tap the screen to focus on an object or area. Then tap
or press the Volume button, or press and hold
your fingerprint sensor to start recording.
5. Tap
or press the Volume button, or press and hold your fingerprint sensor to end the recording.
PANORAMA
Use this mode to take wide-angle shots.
1. Tap
on the screen or swipe right on the screen and choose PANORAMA. Tap to view the details
about PANORAMA mode.
2. Select a suitable location and hold your phone steady, and then tap
or press the Volume button, or press
and hold your fingerprint sensor to start shooting.
3. Follow the onscreen instructions to take the photo. Slowly move your camera from horizontally, ensuring
that the arrow stays level with the center line.
4. Tap
or press the Volume button, or press and hold your fingerprint sensor to stop capturing. The camera
automatically stitches the photos together to create one panoramic photograph.
Note:
Excessive deviation and moving too fast will lead to failure in capture.
MONOCHROME
The camera comes with a separate monochrome lens that takes black and white photos with greater contrast