Operation Manual

20Chapter 3 .
Network and Share
• Receive files: When another device tries to send you files using Bluetooth, select ACCEPT from the dialog
box that appears.
• View received files: You can view received files in following ways:
• Swipe down from the status bar to open the Notification Panel. Then tap the downloaded notification
to view file transfer progress.
• Go to Bluetooth screen and view Received files list.
• On the Home screen, go to Downloads -> -> Recent.
Rename your device
1. Go to Bluetooth screen and tap Device name.
2. Edit the device name and tap RENAME to complete the configuration.
3. 5 Share your mobile data with other devices
You can share your phone’s mobile Internet with other devices (such as phones, tablets, or computers). The
following Internet sharing methods can be used:
Use WLAN hotspot
Set up a portable WLAN hotspot to share your phone’s mobile Internet with other devices. Compared with
Bluetooth tethering, the portable WLAN hotspot feature offers quicker, longer range connections, but power
consumption is higher.
Note:
Your device can’t access the Internet using WLAN when your Portable WLAN hotspot is turned on.
• Open WLAN hotsopt
1. Go to Settings -> Network & Internet -> Hotspot & tethering -> WLAN hotspot.
2. Turn on the switch.
3. After enabling your personal WLAN hotspot, your phone will display and icon in the status bar.
• Set the time for keeping WLAN on when idle: On WLAN hotspot screen, tap Keep WLAN hotspot on, you
can choose Always, or Turn off when idle for 5 min, or Turn off when idle for 10 min.
• Set up WLAN hotspot
On WLAN hotspot screen, tap Set up WLAN hotspot, you can configure following settings. After finishing,
tap SAVE.
• Change the hotspot name: Enter the name of your hotspot and tap SAVE. The Network name is the
hotspot name. By default, this is the name of your phone model. You can manually change the name to
something that is easier to remember.
• Change the security setting: Tap of Security to configure security setting. Your phone uses WPA2
PSK encryption by default. Other devices will require a password to connect to the hotspot. If you
choose None, devices will not require a password to connect to the hotspot.
• Configure a password that is easy to remember: Tap Password and enter the new password (the
password must have at least 8 characters. Check Show password to view your password. The hotspot
password is generated randomly by your phone. For security reasons, choose a password that is not
easy to guess.
• Select a AP band: Your device only supports 2.4 GHz Band.
• Reset: Tap RESET OOB to reset network SSID, security and password to default.
• Configure the maximum number of connections: Touch Maximum connections to change the
maximum number of connections. Your phone will allow up to 8 users to connect to the hotspot.
Note:
After finishing enter the hotspot name or password, you can tap to fold keyboard.
• Manage users