Repair tips

3.8 Replacing door lock
As a manufacturer, we are obliged to provide consumers with the spare part door lock
including repair instructions in accordance with Regulation (EU) 2019/2023. However,
we would like to point out that after replacing a door lock, an electrotechnical safety test
by a qualified electrician is required before the device is put into operation. This person
must be verifiably qualified according to the country-specific laws, regulations and
standards.
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
▶
Electric parts should be repaired by a qualified electricians.
▶
After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Caution
Sharp housing edges!
Cut injuries
▶
Wear protective gloves.
Warning
Slipping of tilted appliances!
Bone fractures / crush injuries
▶
Secure appliances against slipping.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶
Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
Appliances is freely accessible.
Furniture panel has been removed.
Fascia panel has been removed.
Door has been removed.→Page 110
Tension ring has been removed.
Front panel has been removed.
Door seal has been removed.
3.8.1 Removing door lock
1. Disconnect door lock plug.
2. Release door lock.
3. Remove door lock.
Repair
2021-02-16_8001214498 Copyright by BSH Hausgeräte GmbH Page115of481