Repair tips

4.2 Replacing front panel
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
Detergent drawer has been removed.
Fascia panel has been removed.
Door has been removed.
Door seal has been removed.
Base cover has been removed.→Page 62
4.2.1 Removing front panel
Caution
Sharp housing edges!
Cut injuries
▶
Wear protective gloves.
1.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g.
bottom.
▶
Secure component from falling down.
Remove screws from in following order (1-2-3-4).
2. Remove front panel.
4.2.2 Installing front panel
▶
Install in reverse order.
Repair
2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page63of265