User Manual

Operating the appliance en
13
1Operating the appliance
Oper at i ng the appl i anc e You have already learnt about the controls and how
they work. Now we will explain how to apply settings on
your appliance.
Switching the appliance on and off
Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.
Setting the heating function and temperature
It is very easy to apply the settings you require to your
appliance using the function and temperature selector.
To find out which heating function is best for which type
of food, please refer to the beginning of the instruction
manual. ~ "Getting to know your appliance"
on page 8
Example in the picture: CircoTherm hot air ‚ at
160 °C.
1. Use the function selector to set the heating function.
2. Use the temperature selector to set the temperature
or grill setting.
The appliance will start heating after a few seconds.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Note: You can also set a cooking time and end time on
the appliance. ~ "Time-setting options" on page 13
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
Heating-up indicator
The heating-up indicator will remain lit while the
appliance is heating.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the heating-up indicator first goes out.
Note: Due to thermal inertia, the actual temperature
inside the cooking compartment may differ slightly from
the temperature that is displayed.
OTime-setting options
Ti me- set t i ng opt i ons Your appliance has different time-setting options.
An audible signal sounds once the cooking time or
timer duration has elapsed. You can cancel the audible
signal early by pressing the 0 button.
Note: If you have set a time-setting option, the time
interval increases if you set a higher value. Example:
You can set a cooking time of up to one hour in one-
minute increments; for cooking times over one hour,
you can set a cooking time in five-minute increments.
Setting the timer
The timer can be set when the appliance is switched on
or off. It has its own audible signal so that you can tell
whether it is the timer duration or a cooking time that
has elapsed.
Tip: If the set timer duration is the duration for which
you want to cook your food, use the cooking time. The
appliance then switches off automatically.
1. Press the 0 button repeatedly until the Q symbol is
highlighted.


&
Time-setting option Use
Q Timer The timer functions like an egg timer. It runs
independently of the appliance when it is
heating and does not affect the appliance.
x Cooking time Main oven r: Once the set cooking time has
elapsed, the appliance automatically stops
heating.
y End Main oven r: Enter a cooking time and the
required end time. The appliance starts up
automatically so that it finishes cooking at the
required time.
0 Time Set the time on the clock, e.g. after a power
cut, or change it, e.g. from summer time to
winter time.