Installation Guide

ES7
Nota:
En algunos electrodomésticos el modo paso a
paso también se llama «SAP mode» (modo SAP) o
«manual mode» (conexión manual).
Si el modo paso a paso no funciona, comprobar:
- que el electrodoméstico se encuentra en el
margen de alcance de la red doméstica WLAN
(Wi-Fi).
- que el teléfono inteligente/tableta está conectado
a la red doméstica WLAN (Wi-Fi).
- que el teléfono inteligente/tableta y el
electrodoméstico están conectados a la misma
red doméstica WLAN (Wi-Fi).
Paso3: Conectar la placa de cocción
con la aplicación HomeConnect
Seguir las instrucciones del paso3 solo cuando la
aplicación así lo requiera. Los siguientes pasos describen
el manejo del electrodoméstico.
1 | Tocar el
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
sensor y seleccionar la opción
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MiPerl para
abrir los ajustes básicos.
2 | Tocar los ajustes «HomeConnect».
3 | Tocar «Conectar con aplicación».
4 | Seguir las instrucciones de la aplicación.
Nota:
Si no pudo establecerse la conexión, asegurarse de
que el teléfono inteligente/tableta se encuentra en
el margen de alcance de su red doméstica WLAN
(Wi-Fi).