Installation Guide

ES5
Paso2.1: Conectar la placa de cocción a
la red doméstica WLAN (wi) con WPS
Seguir las instrucciones del paso2.1 solo cuando la
aplicación así lo requiera. Los siguientes pasos describen
el manejo del electrodoméstico.
1 | Tocar el
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
sensor y seleccionar la opción
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MiPerl para
abrir los ajustes básicos.
2 | Tocar los ajustes «HomeConnect».
3 | Tocar «Congurar con el asistente» para lanzar el asistente
HomeConnect.
4 | Leer el mensaje y tocar «Siguiente» para continuar.
5 | Activar en los siguientes 2 minutos la función WPS en el
router de la red de internet doméstica.
Tras unos segundos se muestra un mensaje para conrmar
que el proceso de conexión ha concluido correctamente. La
placa está conectada a la red doméstica (Wi-Fi).
La aplicación recibirá una noticación cuando la placa se
haya conectado correctamente a la red doméstica (Wi-Fi).
6 | Seguir las instrucciones de la aplicación.
Nota:
Si la conexión no puede establecerse en el plazo de
2minutos, asegurarse de que su placa de cocción
se encuentra en el margen de alcance de su red
doméstica WLAN (wi).
En algunos electrodomésticos el modoWPS
también se llama «Registro automático».