Installation Guide

PT13
Nota:
Em alguns eletrodomésticos, o modo passo a
passo é também designado de "Modo SAP" ou
"Registo manual".
Se o modo passo a passo não funcionar, verique
se:
- o seu eletrodoméstico se encontra dentro do
alcance da rede doméstica WLAN (WiFi).
- o seu smartphone/tablet está ligado à rede
doméstica WLAN (Wi-Fi).
- o seu smartphone/tablet e o eletrodoméstico
estão ligados à mesma rede doméstica WLAN
(Wi-Fi).
Passo 3: Ligar a placa de cozinhar à
aplicação HomeConnect
Siga as indicações no passo 3 apenas quando a aplicação
o solicitar. Os passos seguintes descrevem a operação no
eletrodoméstico.
1 | Toque no sensor
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
e selecione a opção
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
O Meu Perl, para
aceder às congurações básicas.
2 | Toque na denição "HomeConnect".
3 | Toque em "Ligar à aplicação".
4 | Siga as instruções da aplicação.
Nota:
Se não for possível estabelecer a ligação, certique-
se de que o seu smartphone/tablet se encontra
dentro do alcance da sua rede doméstica WLAN
(Wi-Fi).