Installation Guide

PT11
Passo 2.1: Ligar a placa de cozinhar à
rede doméstica WLAN (Wi-Fi) com WPS
Siga as indicações no passo 2.1 apenas quando a
aplicação o solicitar. Os passos seguintes descrevem a
operação no eletrodoméstico.
1 | Toque no sensor
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
e selecione a opção
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
O Meu Perl,
para aceder às congurações básicas.
2 | Toque na denição "HomeConnect".
3 | Toque em "Regular com o assistente" para iniciar o
assistente do HomeConnect.
4 | Leia a mensagem e toque em "Seguinte" para continuar.
5 | Ative a função WPS no router da sua rede doméstica num
espaço de 2 minutos.
Após alguns segundos, surgirá uma mensagem conrmando
que o processo de ligação foi concluído com sucesso. A
placa está ligada à sua rede local WLAN (Wi-Fi).
A aplicação irá noticá-lo assim que a placa estiver ligada à
sua rede local WLAN (Wi-Fi).
6 | Siga as indicações da aplicação.
Nota:
Se não for possível estabelecer a ligação no espaço
de 2 minutos, certique-se de que a sua placa de
cozinhar se encontra dentro do alcance da sua rede
doméstica WLAN (Wi-Fi).
Em alguns eletrodomésticos, o modo WPS é
também designado de "Registo automático".