Home Connect Leaflet

SV13
Obs!
På vissa vitvaror kallas det stegvisa läget även
”SAP-läge” eller ”Manuell inloggning”.
Om det stegvisa läget inte fungerar måste du
kontrollera:
- att vitvaran är inom räckvidd för WLAN-
hemnätverket (Wi-Fi).
- att din smartphone/surfplatta är uppkopplad mot
WLAN-hemnätverket (Wi-Fi).
- att din smartphone/surfplatta och vitvaran är
uppkopplade mot samma WLAN-hemnätverk
(Wi-Fi).
Moment 3: Koppla upp hällen mot
HomeConnect-appen
Följ bara anvisningarna i moment 3 när appen uppmanar
dig att göra det. Följande moment beskriver hur du
använder vitvaran.
1 | Tryck på sensorn
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
och välj alternativet
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MyProle för att få
upp grundinställningarna.
2 | Tryck på "HomeConnect"-inställningen.
3 | Tryck på “Appanslut”.
4 | Följ appanvisningarna.
Obs!
Om det inte gick att koppla upp, så måste du
kontrollera om din smartphone/surfplatta är inom
räckvidd för WLAN-hemnätverket (Wi-Fi).