Home Connect Leaflet

SV11
Moment 2.1: koppla upp hällen mot
WLAN-hemnätverket (Wi-Fi) med WPS
Följ bara anvisningarna i moment 2.1 när appen uppmanar
dig att göra det. Följande moment beskriver hur du
använder vitvaran.
1 | Tryck på sensorn
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
och välj alternativet
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MyProle för att få
upp grundinställningarna.
2 | Tryck på "HomeConnect"-inställningen.
3 | Tryck på "Ställa in med guiden" för att starta
HomeConnect-guiden.
4 | Läs meddelandet och tryck på "Nästa" för att fortsätta.
5 | Slå på WPS-funktionen på din hemnätverksrouter inom 2
minuter.
Du får upp ett meddelande inom några sekunder att
uppkopplingen lyckades. Hällen är uppkopplad mot ditt
WLAN-hemnätverk (Wi-Fi).
Appen blir meddelad när hällen är uppkopplad OK mot ditt
WLAN-hemnätverk (Wi-Fi).
6 | Följ appanvisningarna.
Obs!
Om det inte gick att koppla upp inom 2 minuter, så
måste du kontrollera om din häll är inom räckvidd
för WLAN-hemnätverket (Wi-Fi).
På vissa vitvaror kallas WPS-läget även "Automatisk
inloggning".