Instructions for Use
Table Of Contents
- Induction hob
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Suitable cookware
- 5 Familiarising yourself with your appliance
- 6 TwistPad®
- 7 Basic operation
- 8 FlexZone
- 9 Extended FlexZone
- 10 PowerMove
- 11 Time-setting options
- 12 PowerBoost
- 13 PanBoost
- 14 Keep-warm function
- 15 PowerTransfer
- 16 Frying Sensor
- 17 Childproof lock
- 18 Wipe protection
- 19 Individual safety switch-off
- 20 Basic settings
- 21 Cookware test
- 22 Home Connect
- 23 Hob-based hood control
- 24 Cleaning and servicing
- 25 Troubleshooting
- 26 Disposal
- 27 Declaration of Conformity
- 28 Customer Service
- 29 Test dishes
- 29.1 Melting the chocolate coating
- 29.2 Heating and keeping lentil stew warm
- 29.3 Heating and keeping lentil stew warm
- 29.4 Béchamel sauce
- 29.5 Cooking rice pudding with the lid on
- 29.6 Cooking rice pudding without a lid
- 29.7 Cooking rice
- 29.8 Roasting a pork loin
- 29.9 Preparing crêpes
- 29.10 Deep-fat frying frozen chips
en Hob-based hood control
20
¡ We recommend that you install security updates as
soon as possible.
22.5 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the HomeConnect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
22.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
HomeConnect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the HomeConnect
functions for use and is only required when you want to
use the HomeConnect functions for the first time.
Note:Please note that the HomeConnect functions
can only be utilised with the HomeConnect app. In-
formation on data protection can be retrieved in the
HomeConnect app.
23 Hob-based hood control
If both appliances are HomeConnect-compatible, con-
nect the appliances in the HomeConnectapp. To do
this, connect the two appliances to HomeConnect and
follow the instructions in the app.
Notes
¡ Regular security updates are provided for your ap-
pliance. If you have connected your hob directly to
an extractor hood, both of these appliances cannot
receive these security updates. To ensure the safe
use of the appliance, we recommend connecting
both appliances to each other via HomeConnect
and installing these updates as soon as they are
provided. A HomeConnect account (which is free of
charge) is required for this.
¡ Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡ In networked standby mode, the appliance requires
a maximum of2W.
¡ You can only connect to the extractor hood via the
HomeConnect app. Other connection routes are no
longer supported.
23.1 Resetting HomeConnectsettings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the HomeConnect settings.
Note:If you reset the HomeConnect settings, the con-
nection to any extractor hood will also be terminated.
1.
Press and hold for 4seconds.
a The display will show the product information.
2.
Touch repeatedly until the display alternately
shows and .
3.
Use the twist knob to set the value to .
23.2 Controlling the extractor hood via the
hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
1.
Touch .
2.
Use the twist knob to select a fan setting.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, turn the twist knob un-
til or appears.
Switching off the fan
▶
Use the twist knob to select the fan setting 0.
Switching on automatic mode
1.
Touch .
2.
Turn the twist knob until the display shows .
a The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
1.
Touch .
2.
Use the twist knob to select the fan setting 0.
3.
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
1.
To switch the lighting on, touch .
2.
To switch the lighting off, touch again.