Instructions for Use
Table Of Contents
- Induction hob
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Suitable cookware
- 5 Familiarising yourself with your appliance
- 6 TwistPad®
- 7 Basic operation
- 8 FlexZone
- 9 Extended FlexZone
- 10 PowerMove
- 11 Time-setting options
- 12 PowerBoost
- 13 PanBoost
- 14 Keep-warm function
- 15 PowerTransfer
- 16 Frying Sensor
- 17 Childproof lock
- 18 Wipe protection
- 19 Individual safety switch-off
- 20 Basic settings
- 21 Cookware test
- 22 Home Connect
- 23 Hob-based hood control
- 24 Cleaning and servicing
- 25 Troubleshooting
- 26 Disposal
- 27 Declaration of Conformity
- 28 Customer Service
- 29 Test dishes
- 29.1 Melting the chocolate coating
- 29.2 Heating and keeping lentil stew warm
- 29.3 Heating and keeping lentil stew warm
- 29.4 Béchamel sauce
- 29.5 Cooking rice pudding with the lid on
- 29.6 Cooking rice pudding without a lid
- 29.7 Cooking rice
- 29.8 Roasting a pork loin
- 29.9 Preparing crêpes
- 29.10 Deep-fat frying frozen chips
Basic settings en
17
Display Setting Value
Automatic switch-off of the cooking zones. – switched off.
1
- - minutes until the appliance switches off auto-
matically.
Duration of the timer end signal tone – 10seconds
– 30seconds
- 1 minute
1
.
Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit, is dis-
played and you cannot select a higher power
level.
- Switched off. Maximum power of the hob
1
.
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W. Recommended for 13 A.
. - 3500 W. Recommended for 16 A.
- 4000 W.
. - 4500 W. Recommended for 20 A.
...
- Maximum power of the hob.
Time for selecting the cooking zone - Unlimited: You can adjust the last selected cooking
zone without having to select it again.
1
– Limited: You can adjust the last selected cooking
zone within 10seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
PowerMove
Allows you to change the preset power levels
for the three cooking areas of the flexible
cooking zone.
Select one of the two cooking zones, set the
required power level in the settings area and
touch to confirm the new power level and
select the next cooking zone.
- Preset power level for the front cooking zone.
- Preset power level for the middle cooking zone.
- Preset power level for the rear cooking zone.
Cookware test
You can use this function to test the quality
of the cookware.
- Not suitable.
- Not optimal.
- Suitable.
Restoring factory settings - Individual settings
1
.
- Factory settings.
1
Factory setting
20.2 To go to the basic settings
Requirement:The hob must be switched off.
1.
To switch on the hob, touch .
2.
Within the next 10 seconds, press and hold for 4
seconds.
Product information Display
Directory for the technical after-sales
service (TK)
Production number
Production number 1 .
Production number 2 .
a The first four displays provide the product informa-
tion. To call up each display, turn the rotary knob
TwistPad®.
3.
Touch to access the basic settings.
a and light up as a presetting.
4.
Touch repeatedly until the desired setting ap-
pears.
5.
Use TwistPad® to select the required setting.
6.
Touch and hold for 4seconds.
a The settings are saved.
20.3 Discarding changes to the basic
settings
▶
Touch .
a All changes are discarded and not saved.