Home Connect Guide

ManualsBrandsNeff ManualsHouseholdT59TF6RN0

EN6

Step 2.2: Connect your hob to your

WLAN home network (Wi-Fi) step by step

Please enter step 2.2 only when prompted to by the app.

The following steps describe operations at the home

appliance itself.

1 | Touch the

Home Connect en

Manual registration in the home network

1. Touch the 0 sensor and then select

option 4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Use assistant to configure settings" to launch

the Home Connect assistant.

You will be asked to press the WPS button on your

router.

4. Select "WPS not supported".

5. Read the message and touch "Start" to continue.

6. Open the network settings on your mobile device

and use the SSID "Home Connect" and the key

"Home Connect" to log your mobile device into the

hob network.

Note: If it is unable to connect, relaunch the

assistant and manually log the appliance into your

home network.

7. Follow the prompt in the app and enter the name

and password for your home network (Wi-Fi).

A message will appear to say that the appliance can

now be connected to the app.

8. Touch "Next" to begin the process of connecting to

the app.

Once the login process is complete, a message will

appear to say that it has been successful. The

D symbol will appear in the main area on the control

panel.

:36QRWVXSSRUWHG

$XWRPDWLFQHWZRUNORJLQ

$FWLYDWH:36IXQFWLRQRQURXWHU

PLQ_V

1H[W

&RQQHFWWRQHWZRUN

6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN

&RQQHFWWRDSS

sensor and then select option

Home Connect en

Manual registration in the home network

1. Touch the 0 sensor and then select

option 4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Use assistant to configure settings" to launch

the Home Connect assistant.

You will be asked to press the WPS button on your

router.

4. Select "WPS not supported".

5. Read the message and touch "Start" to continue.

6. Open the network settings on your mobile device

and use the SSID "Home Connect" and the key

"Home Connect" to log your mobile device into the

hob network.

Note: If it is unable to connect, relaunch the

assistant and manually log the appliance into your

home network.

7. Follow the prompt in the app and enter the name

and password for your home network (Wi-Fi).

A message will appear to say that the appliance can

now be connected to the app.

8. Touch "Next" to begin the process of connecting to

the app.

Once the login process is complete, a message will

appear to say that it has been successful. The

D symbol will appear in the main area on the control

panel.

:36QRWVXSSRUWHG

$XWRPDWLFQHWZRUNORJLQ

$FWLYDWH:36IXQFWLRQRQURXWHU

PLQ_V

1H[W

&RQQHFWWRQHWZRUN

6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN

&RQQHFWWRDSS

MyProle, to

open the basic settings.

2 | Touch the "HomeConnect" setting.

3 | Touch "Use wizard to cong. settings" to launch the

HomeConnect assistant.

4 | Read the message and touch "Next" to continue.

5 | Select "WPS not supported" if you are prompted to press

the WPS button on your router.

en Home Connect

oHome Connect

Ho me Connect

Note: Home Connect is due to be introduced for NEFF

from the end of 2018.

This appliance is WLAN-enabled and settings can be

sent to the appliance via a mobile device.

If the appliance is not connected to the home network,

the appliance functions in the same way as a hob with

no network connection. The hob can always be

operated via the control panel.

The availability of the Home Connect function depends

on the availability of Home Connect services in your

country. Home Connect services are not available in

every country.You can find more information on this at

www.home-connect.com.

Notes

■ Hobs are not designed to be used unattended - you

must always keep an eye on the cooking process.

■ Ensure that you follow the safety instructions in this

instruction manual and that these are also observed

when operating the appliance via the Home Connect

app. You must also follow the instructions in the

Home Connect app.~ "Important safety

information" on page 6

■ Using the Home Connect app, you can send settings

to your appliance and then have to confirm them on

the appliance. It is not possible to operate the

appliance whilst you are away from home.

■ Operation on the appliance always has priority.

During this time, it is not possible to operate the

appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must

have installed and set up the Home Connect app on

your mobile device.

Follow the steps specified by the app to make the

settings.

The app must be open in order to perform the setup

process.

Automatic registration in the home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Manually logging into your

home network".

1. Touch the 0 sensor and then select

option

4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Use assistant to configure settings" to launch

the Home Connect assistant.

A message will appear regarding the mobile device.

4. Touch "Next" to continue.

5. Press the WPS button on the router within the next

2 minutes.

A message will be displayed to notify you when the

hob is successfully connected to your home

network.

Note: If it is unable to connect, relaunch the

assistant or manually log the appliance into your

home network.

A message will appear to say that the appliance can

now be connected to the app.

6. Touch "Next" to begin the process of connecting to

the app.

Once the login process is complete, a message will

appear to say that it has been successful. The

D symbol will appear in the main area on the control

panel.

8VHDVVLVWDQWWRFRQILJXUHVHWWLQJV

+RPH&RQQHFW

1H[W

&RQQHFWWRQHWZRUN

6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN

&RQQHFWWRDSS

Home Connect en

Manual registration in the home network

1. Touch the 0 sensor and then select

option

4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Use assistant to configure settings" to launch

the Home Connect assistant.

You will be asked to press the WPS button on your

router.

4. Select "WPS not supported".

5. Read the message and touch "Start" to continue.

6. Open the network settings on your mobile device

and use the SSID "Home Connect" and the key

"Home Connect" to log your mobile device into the

hob network.

Note: If it is unable to connect, relaunch the

assistant and manually log the appliance into your

home network.

7. Follow the prompt in the app and enter the name

and password for your home network (Wi-Fi).

A message will appear to say that the appliance can

now be connected to the app.

8. Touch "Next" to begin the process of connecting to

the app.

Once the login process is complete, a message will

appear to say that it has been successful. The

D symbol will appear in the main area on the control

panel.

:36QRWVXSSRUWHG

$XWRPDWLFQHWZRUNORJLQ

$FWLYDWH:36IXQFWLRQRQURXWHU

PLQ_V

1H[W

&RQQHFWWRQHWZRUN

6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN

&RQQHFWWRDSS

Home Connect en

Deactivating WLAN

If Wi-Fi has been activated, you can use the Home

Connect functions.

Note:

In networked standby mode, your appliance requires a

maximum of 2 W.

1. Touch the 0 sensor and then select

option

4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Wi-Fi".

4. Touch "Off".

This deactivates Wi-Fi; the

D symbol will go out on the

control panel.

Disconnecting from the network

Di sconnect i ng f r om t he net work

You can disconnect your hob from the network at any

time.

Note:

If your hob is disconnected from the network, it is not

possible to operate it using Home Connect.

1. Touch the 0 sensor and then select

option

4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Disconnect".

4. Touch "Next" to confirm.

This disconnects the appliance from your home

network; the

D symbol will go out on the control panel.

Note:

The network connection will also be deleted if you

restore the factory settings on your appliance.

Connecting to the network

Connec t i ng to t he net wor k

1. Touch the 0 sensor and then select

option

4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch "Connect to network".

4. Follow the instructions in the section entitled

"Manually logging into your home network" or

"Automatic login to your home network".

Connect to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your hob.

Notes

■ The appliance must be connected to the network.

■ The app must be open and be set up.

■ If your extractor hood is directly connected, first

disconnect the hob from your home network and

then initiate the connection process

again.~ "Disconnecting from the network"

on page 33~ "Connecting to the network"

on page 33

1. Touch the 0 sensor and then select

option

4 MyProfile, to open the basic settings.

2. Touch the "Home Connect" setting.

3. Touch “Connect to app”.

You can also connect a second Home Connect

account to the hob. To do this, touch "Connect to

another app".

4. Follow the instructions in the app to complete the

connection process.

:L)L

2II

1H[W

'LVFRQQHFW

'HOHWHDOOQHWZRUN

VHWWLQJVIURPDSSOLDQFH"

&DQFHO

+RPH&RQQHFW

&RQQHFWWRDSS

:L)L

&RQILJXUHVHWWLQJVYLDDSS

6 | Read the message and touch "Start" to continue.

The appliance opens for some minutes a temporary WLAN

network named "HomeConnect" with the password

"HomeConnect".

Using this temporary WLAN network, the app will

transmit the name (SSID) and the password of your

home network to the hob, so enabling it to connect

to the network.