Home Connect

IT13
Nota:
In alcuni elettrodomestici, la modalità passo dopo
passo è anche chiamata "modalità SAP" o "accesso
manuale".
Se la modalità passo dopo passo non funziona,
controllate che:
- L'elettrodomestico sia coperto dal segnale della
rete domestica WLAN (Wi-Fi).
- Lo smartphone/tablet sia collegato alla rete
domestica WLAN (Wi-Fi).
- Lo smartphone/tablet e l'elettrodomestico siano
collegati alla stessa rete WLAN (Wi-Fi).
Fase 3: Collegamento del piano cottura
all'app HomeConnect
Seguite le istruzioni della fase 3 soltanto se l'app lo
richiede. Le fasi seguenti descrivono le operazioni
sull'elettrodomestico.
1 | Toccare il
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
sensore, quindi selezionare l'opzione
Home Connect en
31
Manual registration in the home network
1. Touch the 0 sensor and then select
option 4 MyProfile, to open the basic settings.
2. Touch the "Home Connect" setting.
3. Touch "Use assistant to configure settings" to launch
the Home Connect assistant.
You will be asked to press the WPS button on your
router.
4. Select "WPS not supported".
5. Read the message and touch "Start" to continue.
6. Open the network settings on your mobile device
and use the SSID "Home Connect" and the key
"Home Connect" to log your mobile device into the
hob network.
Note: If it is unable to connect, relaunch the
assistant and manually log the appliance into your
home network.
7. Follow the prompt in the app and enter the name
and password for your home network (Wi-Fi).
A message will appear to say that the appliance can
now be connected to the app.
8. Touch "Next" to begin the process of connecting to
the app.
Once the login process is complete, a message will
appear to say that it has been successful. The
D symbol will appear in the main area on the control
panel.
:36QRWVXSSRUWHG
$XWRPDWLFQHWZRUNORJLQ
$FWLYDWH:36IXQFWLRQRQURXWHU
PLQ_V
1H[W
&RQQHFWWRQHWZRUN
6XFFHVVIXOO\FRQQHFWHGWRQHWZRUN
&RQQHFWWRDSS
MyProle, per aprire le impostazioni di base.
2 | Toccare l'impostazione "HomeConnect".
3 | Toccare “Collegare con app”.
4 | Seguire le istruzioni nell'app.
Nota:
Se non si riesce a stabilire il collegamento,
accertatevi che il vostro smartphone/tablet sia
coperto dal segnale della rete domestica WLAN
(Wi-Fi).