Instructions for Use
Table Of Contents
- Induction hob
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Suitable cookware
- 5 Familiarising yourself with your appliance
- 6 TwistPad®
- 7 Basic operation
- 8 FlexZone
- 9 PowerMove
- 10 Time-setting options
- 11 PowerBoost
- 12 PanBoost
- 13 Keep-warm function
- 14 Frying Sensor
- 15 Childproof lock
- 16 Wipe protection
- 17 Individual safety switch-off
- 18 Basic settings
- 19 Cookware test
- 20 Home Connect
- 21 Hob-based hood control
- 22 Cleaning and servicing
- 23 Troubleshooting
- 24 Disposal
- 25 Declaration of Conformity
- 26 Customer Service
- 27 Test dishes
- 27.1 Melting the chocolate coating
- 27.2 Heating and keeping lentil stew warm
- 27.3 Heating and keeping lentil stew warm
- 27.4 Béchamel sauce
- 27.5 Cooking rice pudding with the lid on
- 27.6 Cooking rice pudding without a lid
- 27.7 Cooking rice
- 27.8 Roasting a pork loin
- 27.9 Preparing crêpes
- 27.10 Deep-fat frying frozen chips
HomeConnect en
17
3.
Turn TwistPad®. flashes in the cooking zones.
a The function is switched on.
a After 10 seconds, the result appears in the cooking
zone displays.
19.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
Note:If you have any unfavourable results, reposition
the cookware on a smaller cooking zone, if available.
To reactivate the function, turn TwistPad®.
20 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
HomeConnect.
¡ Please also follow the instructions in the HomeCon-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡ Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡ In networked standby mode, the appliance requires
a maximum of2W.
20.1 Setting up HomeConnect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Download the HomeConnect app.
2.
Open the HomeConnect app and scan the follow-
ing QR code.
3.
Follow the instructions in the HomeConnect app.
20.2 Overview of the HomeConnect settings
You can adjust the settings and network settings for HomeConnect by going to your hob's basic settings.
Setting Selection or display Additional information
Network connection
– Not connected/disconnect network
– Connect automatically
– Connect manually
– Connected
Log on the hob in the Wi-Fi home network (Wi-Fi) or dis-
connect from the network
1
Factory setting