Instructions for Use

en Home Connect
38
Notes
■ The •’ƒ setting is only displayed if the appliance is
connected to the home network.
■ The •’„ setting is only displayed if the appliance
has once connected to a network.
■ The •’† setting is only displayed if an update is
available.
■ The •’‡ setting is only displayed if Customer
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
■ The •’ˆ and •’‰ settings are only displayed if
there is a connection to WLAN.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
1. Switch on the hob.
2. Touch and hold the . symbol for 3 seconds.
The product information is displayed.
3. Touch the . symbol repeatedly until the •’„
setting appears.
‚ lights up on the cooking position display.
4. Set the value to ‹ using the twist knob.
This deactivates Wi-Fi; the D symbol will go out on the
control panel.
Disconnecting from the network
Di s connec t i ng from the net wor k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
1. Switch on the hob.
2. Touch and hold the . symbol for 3 seconds.
The product information is displayed.
3. Touch the . symbol repeatedly until the •’‚
setting appears.
„ lights up on the cooking position display.
4. Set the value to ‹ using the twist knob.
This disconnects the appliance from your home
network; the D symbol will go out on the control panel.
Connecting to the network
Connect i ng to the net wor k
1. Switch on the hob.
2. Touch and hold the . symbol for 3 seconds.
The product information is displayed.
3. Touch the . symbol repeatedly until the •’‚
setting appears.
‹ lights up on the cooking position display.
4. Using the twist knob,
set the "Connect automatically" ‚ value or
the "Connect manually" ƒ value.
5. Follow the instructions as per ~ "Automatic
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
■ The appliance must be connected to the network.
■ The app must be open and be set up.
•’ˆ
WLAN signal strength
‹
Not connected to home network (WLAN).
‚
Signal strength 1 (poor)
ƒ
Signal strength 2 (moderate)
„
Signal strength 3 (good)
•’‰
Connection to Home Connect server
‹
Not connected.
‚
Connected.
Symbol Function
* Basic setting