Instructions for Use

en Before using for the first time

Operating the hob without the twist knob

The hob can also be operated without the twist knob:

1. Switch on the hob using the main switch.

2. Within the next 5 seconds, simultaneously touch and

hold the œ and . symbols for 4 seconds. An

audible signal will sound.

3. Touch the . symbol repeatedly until the indicator for

the required hotplate lights up.

4. Then set the required heat setting using the œ or

x symbol.

The hotplate has now been activated.

Notes

■ The timer function cannot be activated without the

twist knob.

■ The twist knob can be placed back on the twistpad

at any time.

KBefore using for the first

time

Be f o r e usi ng for the first time

Please read the following information before using the

appliance for the first time:

Clean the appliance and all accessory parts thoroughly.

Before you can use your new appliance, you must apply

certain settings.

Switch the hob on and off using the main switch #.

Setting the operating mode

The appliance is supplied with a preset air recirculation

mode.

When the hob is installed with an air outlet to the

outside, you must configure the setting

™‚ˆ in this

mode. See section ~ "Basic settings".