Instruction manual

en CombiZone function
14
wCombiZone function
Co mbi Zone function You can use this function to connect the Combi zone
and set the same heat setting for both cooking zones.
This is especially suitable for cooking with oblong
cookware.
Notes regarding cookware
For best results, use cookware that matches the size of
the two cooking zones. Place the cookware in the
centre of the cooking zones.
If you are using only one piece of cookware on one of
the two cooking zones, you can move it to the second
cooking zone. If you do this, the heat setting and the
selected settings are transferred.
Activation
The hob must be on.
1. Using the twist knob, select one of the two hotplates
in the combi zone and set the heat setting.
2. Touch the þ symbol. The t indicator lights up.
The heat setting lights up in the displays for the two
combined hotplates.
The function was activated.
Changing the heat setting
Select the hotplate and change the heat setting using
the twist knob.
Deactivating
Select one of the two hotplates assigned to this function
and touch the þ symbol.
The function was deactivated. The two hotplates will
now function independently.
uMove function
Mov e function You can use this function to connect the Combi zone
and select different heat settings for the two cooking
zones. Default heat settings:
Front cooking zone = heat setting Š
Rear cooking zone = heat setting ‚.
The heat settings for each cooking zone can be
changed independently of one another.
Notes
■ Only place cookware on one of the hotplates. The
function will not be activated if there is cookware on
each of the two hotplates.
■ The heat setting is less brightly lit on the display for
the hotplate on which there is no cookware. It will not
be activated until the cookware is moved to this
hotplate and is detected.
■ If the function has already been activated and a
second piece of cookware is placed on the free
hotplate, the display lights up less brightly, as
before. The hotplate is not active. The hotplate is
activated when the first piece of cookware is
removed.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
Only use one piece of cookware that only covers one of
the cooking zones.
Move the cookware from one cooking zone to another:
Recommendations
Set the cookware down in such a way
that only one of the combined cooking
zones is covered at any one time.
Otherwise the hotplates will not be acti-
vated correctly and the cooking result
will not be satisfactory.