HOB [en] INSTRUCTION MANUAL T4..T4...
: : : : : : ,(& 2 Ø = cm
en Table of contents [ en] I NSTRUCTI ON MANUAL 8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ( Important safety information . . . . . . . . . . . . . . . 5 ] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 6 k Wipe protection . . . . . . . . . . . . . . . . . . . . . . . . . 17 b Automatic safety cut-out . . . . . . . . . . . . . . . . . . 17 Q Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Overview . . . . . . . . . . . . . . . . .
en Intended use 8Intended use Read these instructions carefully. Please keep the instruction and installation manual, as well as the appliance certificate, in a safe place for later use or for subsequent owners. Check the appliance after removing it from the packaging. If it has suffered any damage in transport, do not connect the appliance, contact the Technical Assistance Service and provide written notification of the damage caused, otherwise you will lose your right to any type of compensation.
Important safety information (Important safety information I mpor t ant saf et y i nf or mat i on :Warning – Risk of fire! Hot oil and fat can ignite very quickly. Never leave hot fat or oil unattended. Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar. Risk of fire! ■ The hotplates become very hot. Never place combustible items on the hob. Never place objects on the hob.
en Causes of damage ]Causes of damage Caution! Rough pan bases may scratch the hob. ■ Avoid leaving empty pots and pans on the hotplate. Doing so may cause damage. ■ Do not place hot pans on the control panel, the indicator area, or the hob frame. Doing so may cause damage. ■ Hard or pointed objects dropped on the hob may damage it. ■ Aluminium foil and plastic containers will melt if placed on the hotplate while it is hot. The use of laminated sheeting is not recommended on the hob.
Environmental protection 7Environmental protection In this section, you can find information about saving energy and disposing of the appliance. Envi r onment al pr ot ect i on Energy-saving advice ■ ■ ■ ■ ■ ■ Always use the correct lid for each pan. Cooking without a lid uses a lot more energy. Use a glass lid to provide visibility and avoid having to lift the lid. Use pans with flat bases. Bases that are not flat use a lot more energy.
en ■ Induction cooking The ferromagnetic area will also be reduced if the material from which the base of the cookware is made contains aluminium, for example. This may mean that the cookware will not become sufficiently hot or even that it will not be detected.
Getting to know your appliance en *Getting to know your appliance You can find information on the dimensions and power of the hotplates in~ Page 2 Get i ng t o know your ap l i ance Note: Depending on the appliance model, individual details and colours may differ. The control panel Indicators Controls # – ˜ œ x .
en Twist-Pad with Twist knob jTwist-Pad with Twist knob Operating the hob without the twist knob The twistpad is the area in which you can use the twist knob to select the hotplates and heat settings. The twist knob automatically centres itself in the twistpad area. The twist knob is magnetic and is placed on top of the twistpad. To activate a hotplate, touch the twist knob at the level for the required hotplate. Turning the twist knob selects the heat setting. 1.
Operating the appliance 1Operating the appliance This chapter explains how to set a hotplate. The table shows heat settings and cooking times for various meals. en Changing the heat setting Select the hotplate and change the heat setting using the twist knob. Oper at i ng t he ap l i ance Switching the hob on and off The main switch is used to switch the hob on and off. To switch on: Touch the # symbol. The display above the main switch lights up. The hob is ready to use.
en Operating the appliance Cooking table The table shows which heat setting is suitable for each type of food. The cooking time may vary depending on the type, weight, thickness and quality of the food. Heat setting Cooking time (mins) Melting Chocolate coating Butter, honey, gelatine 1 - 1. 1-2 - Heating and keeping warm Stew, e.g. lentil stew Milk* Heating sausages in water* 1. - 2 1. - 2.
Operating the appliance Roasting/frying with little oil* Escalope, plain or breaded Escalope, frozen Chop, plain or breaded** Steak (3 cm thick) Poultry breast (2 cm thick)** Poultry breast, frozen** Rissoles (3 cm thick)** Hamburgers (2 cm thick)** Fish and fish fillet, plain Fish and fish fillet, breaded Fish, breaded and frozen, e.g. fish fingers Scampi, prawns Sautéeing fresh vegetables and mushrooms Stir-fry, vegetables, meat cut in Asian-style strips Frozen dishes, e.g.
en Time-setting options OTime-setting options Ti me- set i ng opt i ons Your hob has three timer functions: ■ ■ ■ Programming the cooking time Kitchen timer Stopwatch function Programming the cooking time The hotplate automatically switches off after the time that is set has elapsed. Setting procedure: 1. Select the hotplate and the required heat setting. 2. Touch the x symbol. The x display for the hotplate lights up. ‹‹ lights up on the timer display.
PowerBoost function en vPowerBoost function xShortBoost function The PowerBoost function enables you to heat up large quantities of water faster than when using heat setting Š. The ShortBoost function enables you to heat cookware faster than when using heat setting Š. Power Bo st f unct i on This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use (see illustration).
en Keep warm function zKeep warm function This function is suitable for melting chocolate or butter and for keeping food warm. AChildproof lock You can use the childproof lock to prevent children from switching on the hob. Ke p war m f unct i on Chi l dpr o f l ock Activation Activating and deactivating the childproof lock 1. Select the required hotplate. 2. Touch the – within the next 10 seconds. – lights up on the display. The function is activated. Deactivation 1. Select the hotplate. 2.
Wipe protection en kWipe protection bAutomatic safety cut-out Wiping over the control panel while the hob is switched on may alter the settings. To avoid doing this, you can use the hob's "Lock control panel for cleaning" function. To activate this function: Remove the twist knob. The z indicator will be lit.The control panel will remain locked for 35 seconds. You will now be able to clean the surface of the control panel without altering the settings.
en Basic settings QBasic settings The appliance has various basic settings. These basic settings can be altered to suit your individual requirements. Basi c set i ngs Indicator/ symbol Function ™‚ Childproof lock ‹ ‚ ƒ ™ƒ Signal tones ‹ ‚ ƒ „ ™„ Confirmation and fault signals are switched off. Only the fault signal is switched on. Only the confirmation signal is switched on. All signal tones are switched on.* Display energy consumption ‹ ‚ ™† Manual*. Automatic. Function deactivated.
Basic settings ™‹ en Restore to standard settings ‹ ‚ Individual settings.* Restore factory settings. *Factory setting **The hob's maximum power output is shown on the rating plate. -------- To access the basic settings: 6. Touch the The hob must be off. The settings have been saved. 1. Switch on the hob. 2. Within ten seconds, touch and hold the . symbol for Leaving the basic settings Turn off the hob with the main switch. approximately three seconds.
en Energy consumption indicator [Energy consumption indicator This function indicates the total amount of energy consumed by this hob the last time it was used for cooking. Once the hob is switched off, the energy consumption is displayed in kilowatt hours (e.g. ‚.‹‰ kWh) for 10 seconds. The accuracy of the information displayed depends on the voltage quality of the mains power supply, among other factors.
Power manager en hPower manager DCleaning You can use the power manager to set the total power of the hob. The hob is preset at the factory. Its maximum performance is specified on the rating plate. You can use the power manager to change the value in accordance with the requirements for the relevant electrical installation. In order not to exceed this set value, the hob automatically distributes the power available between the cooking zones that are switched on.
en Frequently Asked Questions (FAQ) {Frequently Asked Questions (FAQ) Fr equent l y Asked Quest i ons ( FAQ) Using the appliance Why can't I switch on the hob and why is the childproof lock symbol lit? The childproof lock is activated. You can find information on this function in the section on ~ "Childproof lock" Why are the displays flashing and why can I hear an audible signal? Remove any liquid or food remains from the control panel. Remove any objects from the control panel.
Trouble shooting en 3Trouble shooting Usually, faults are small matters that are easy to eliminate. Please read the information in the table before calling the after-sales service. Tr oubl e sho t i ng Display None Possible cause The power supply has been disconnected. The device has not been connected in accordance with the circuit diagram. Electronics fault.
en Customer service 4Customer service Our after-sales service is there for you if your appliance needs to be repaired. We will always find an appropriate solution, also in order to avoid after-sales personnel having to make unnecessary visits. Cust omer ser vi ce E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service.
Test dishes en ETest dishes This table has been produced for test institutes to facilitate the testing of our appliances. The data in the table refer to our Schulte-Ufer cookware accessories (4-piece cooking set for induction hob Z9442X0) with the following dimensions: Test di shes ■ ■ ■ ■ Saucepan: 16 cm Ø, 1.2 l for 14.5 cm Ø hotplates Pot: 16 cm Ø, 1.7 l for 14.5 cm Ø hotplates Pot: 22 cm Ø, 4.
en Test dishes Test dishes Preheating Heat set- Cooking time Cookware Lid ting (min:sec) Cooking rice pudding Rice pudding, cooked with the lid on Temperature of the milk: 7 ºC Heat the milk until it starts to rise up. Set the recommended heat setting and add rice, sugar and salt to the milk. The cooking time, including preheating, is approx. 45 minutes. Ingredients: 190 g short-grain rice, 90 g sugar, 750 ml milk (3.
*9001063764* 9001063764 980917(20) en
