Product specification sheet

2/3
N 70, gas hob, 60 cm, Stain
l
e
s
s
ste
el
T
2
6
D
A
5
9N0
Features
Design
●
Stainless steel surface
●
black cast iron pan supports with protective rubber feet
Usage convenience
●
FlameSelect with 9 steps: precisely control and adjust the flame in
nine defined levels.
●
LED display for each zone: see the selected power level and the
residual heat.
●
Design co-ordinated control dials: easily access dials in front with
strong grip for effortless turning.
●
Ignition via control dials: just push and turn the dials to ignite the
flame.
Burners and power
●
4 burner hob
●
Left front: Standard burner up to 1.75 KW (depending on gas
type)
●
Left rear: Standard burner up to 1.75 KW (depending on gas type)
●
Right rear: WOK burner up to 3.5 KW (depending on gas type)
●
Right front: Economy burner up to 1 KW (depending on gas type)
Safety
●
Flame failure safety device: prevents unwanted gas flow when
flame goes out.
●
2-stage residual heat indicators: indicates which burner parts and
pan supports are still hot.
Installation (gas types & measurements)
●
Usable for: Nat gas L/LL G25/20mbar(DE)
NG H/E 20mbar, E+ 20/25mbar Natural gas H 25 mbar (HU)
Natural gas L 25 mbar (NL) Liquid gas G30,31 28-30/37mbar
Liquid gas G30 37 mbar (PL) Liquid gas 50 mbar
●
Factory set for connection to mains gas
●
Nozzle set for LPG jets (28-30/37mbar) included. Nozzles for
all other gas types can be ordered via the customer service. For
nozzle change, please contact the customer service.
●
Dimensions of the product (HxWxD mm): 53 x 582 x 520
●
Required niche size for installation (HxWxD mm) : 45 x 560 x (480
- 492)
●
Min. worktop thickness: 30 mm
●
Power cord: 1 m
●
Connected load: 8 KW