Instruction Manual

Getting to know your appliance en
53
*Getting to know your
appliance
Get t i ng to know your appl i ance The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models. ~ Page 2
The control panel
Notes
■ Depending on the operating condition of the hob, the
controls which can currently be selected light up. If
you touch them, the relevant function is activated.
■ The controls which cannot currently be selected do
not light up.
■ Always keep the controls dry. Moisture reduces their
effectiveness.
■ Do not pull pans close to the displays and sensors.
The electronics could overheat.
The hotplates
Notes
■ Any dark areas in the glow pattern of the hotplate
are due to technical reasons. The function of the
hotplate is not affected.
■ Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
■ With multi-circuit hotplates the heater elements of the
inner filament circuits and the heater element of the
activations may switch on and off at different times.

Í

$
Indicators
‚-Š
Heat settings
‹
Operating readiness
•/œ
Residual heat
˜
PowerBoost function
–
Keep-warm function
‰‰
Timer
D
Wi-Fi
Controls
#
Main switch
–
Keep-warm function
˜
PowerBoost function
Û
Sensor frying system
ð
Automatic zone control
Õ
Combination heating element
6
Lighting hood
A
Fan setting hood
œ
Stopwatch function
x
Timer
U
Kitchen timer/child safety lock
Hotplate Activating and deactivating
$
Single-circuit hot-
plate
ð
Dual-circuit hotplate Select the hotplate and touch the
ðsymbol
When the hotplate is activated: the corresponding indicator lights up