User Manual
Installation and connection aus
45
Transporting
Empty the dishwasher and secure loose
parts.
Drain the appliance according to the
following steps:
1. Turn on water supply.
2. Open the door.
3. Switch on ON/OFF switch (.
4. Select programme with the highest
temperature.
The estimated programme duration
appears in the display window h.
5. Press START button `.
6. Close the door.
Programme sequence starts.
7. Open the door after
approx. 4 minutes.
8. Press and hold the START button
` for about 3 seconds.
The value ‹‹h:‹‚m appears in the
display window h.
9. Close the door.
10. Open the door after approx.
1 minute.
The value ‹‹h:‹‹m appears in the
display window h.
11. Switch off ON/OFF switch (.
12. Turn off water supply, disconnect
supply hose and drain water.
Note: Always transport the dishwasher
upright. This prevents residual water
from getting into the machine’s controls
and causing the programme sequence
to malfunction.
Protection against frost
Pr ot ec t i on agai nst frost (Empt y i ng the appl i anc e)
If the appliance is in a room where
there is a risk of frost (e.g. holiday
home), empty the appliance completely
(see Transportation).
6XEMHFWWRFKDQ
J
HV