User Manual
Table Of Contents
- en User manual
- KI886..
- en Table of contents
- en User manual
- ( Safety instructions 4
- 8 Intended use 6
- 7 Environmental protection 6
- 5 Installation and connection 7
- * Getting to know your appliance 10
- 1 Operating the appliance 12
- M Alarm 14
- o Home Connect 14
- U Refrigerator compartment 18
- T Cool-fresh compartment 19
- W Freezer compartment 20
- = Defrosting 23
- D Cleaning 23
- l Odours 24
- 9 Lighting 24
- > Noises 24
- 3 Faults – what to do? 25
- 4 Customer service 27
- About these instructions
- Risk of explosion
- Risk of electric shock
- Risk of cold burns
- Risk of injury
- Fire hazard/Danger due to refrigerants
- Fire hazard
- Avoiding placing children and vulnerable people at risk
- Damage
- Weight
- 8 Intended use
- 7 Environmental protection
- 5 Installation and connection
- Tips for saving energy
- If you follow the instructions below, your appliance will use less power.
- The arrangement of the features does not affect the energy consumption of the appliance.
- Installing the appliance
- Note:
- Caution!
- Risk of burns!
- Using the appliance
- --------
- Before using your appliance for the first time
- Electrical connection
- * Getting to know your appliance
- 1 Operating the appliance
- M Alarm
- o Home Connect
- Home Connect
- Note:
- Note:
- Setting up Home Connect
- Notes
- Automatic connection with the home network (WLAN)
- 1. Press the F button.
- 2. Press button ( / ) refrigerator compartment until the refrigerator compartment temperature display shows AC and the freezer compartment temperature display shows OF.
- 3. Press button ( / ) freezer compartment.
- 4. Within those 2 minutes, activate the WPS function on the home network router (e.g. using the WPS/WLAN button; observe information on this topic in the router documentation).
- Note:
- Manual connection with the home network (WLAN)
- 1. Press the F button.
- 2. Press button ( / ) refrigerator compartment until the refrigerator compartment temperature display shows SA and the freezer compartment temperature display shows OF.
- 3. Press button ( / ) freezer compartment.
- 4. The refrigerator has now set up its own WLAN network with the network name HomeConnect.
- 5. Call up the WLAN settings in the settings menu of the mobile device.
- 6. Connect the mobile device with the WLAN network HomeConnect.
- 7. After successfully connecting, open the Home Connect app on the mobile device.
- 8. As soon as the refrigerator has been found, enter the network name (SSID) and the password (Key) of your own home network (WLAN) into the corresponding fields.
- 9. Confirm with the button Transmit to domestic appliances.
- Connecting the refrigerator to the Home Connect app
- 1. Press F button.
- 2. Keep pressing ( / ) button refrigerator compartment until the refrigerator compartment temperature display shows PA and the freezer compartment temperature display shows OF.
- 3. Press ( / ) button freezer compartment to connect the appliance to the app.
- 4. Open the app and wait until the refrigerator is displayed. Use Add to confirm the connection between the app and the refrigerator.
- 5. Follow the instructions in the app until the process is complete.
- Note:
- Verify signal strength
- Resetting Home Connect settings
- Installing updates for the Home Connect software
- Information on data protection
- Declaration of conformity
- U Refrigerator compartment
- T Cool-fresh compartment
- W Freezer compartment
- Freezer compartment
- Freezing small amounts of food
- Maximum freezing capacity
- Prerequisites for max. freezing capacity
- 1. Approx. 24 hours before inserting fresh produce: switch on super freezing.
- 2. Take the container out of the freezer compartment and stack the food directly on the shelves and on the floor of the freezer compartment.
- 3. First fill the upper compartment with food. This is where the food will freeze most quickly.
- 4. If the top compartment is inadequate, store the remaining quantity in the compartment underneath starting at the front right side.
- 5. Freeze fresh food as close as possible to the side panels.
- Prerequisites for max. freezing capacity
- Fully utilising the freezer volume
- Purchasing frozen food
- Note when loading products
- Freezing fresh food
- Thawing frozen food
- = Defrosting
- D Cleaning
- Cleaning
- Caution!
- Avoid damaging the appliance and the fittings.
- Cleaning the equipment
- l Odours
- Odours
- 1. Switch off the appliance with the On/Off button #.
- 2. Take all food out of the appliance.
- 3. Clean the inside.~ "Cleaning" on page 23
- 4. Clean all packages.
- 5. Seal strong smelling food in order to avoid odours from forming.
- 6. Switch the appliance on again.
- 7. Store food in the appliance.
- 8. Check whether the formation of odours is still occurring after 24 hours.
- 9 Lighting
- > Noises
- 3 Faults – what to do?
- Faults – what to do?
- Before you call customer service, use this table to check whether you can rectify the fault yourself.
- Temperature differs greatly from the set value.
- Displays do not illuminate.
- Display shows E....
- A warning signal sounds and the Alarm button is lit.
- Display flashes, warning signal sounds and button Alarm is lit.
- Display flashes.
- Appliance is not cooling, display and lighting are lit.
- Automatic super freezing does not switch on.
- It is too warm or too cold in the cool-fresh compartment.
- --------
- !
- "
- -
- en User manual
Defrosting en
23
= Defrosting
Def r os t i ng
Refrigerator compartment
The defrost process is performed
automatically.
Freezer compartment
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
D Cleaning
Cl e a n i n g
Caution!
Avoid damaging the appliance and the
fittings.
■ Do not use abrasive, chloride or
acidic cleaning agents or solvents.
■ Do not use scouring or abrasive
sponges.
The metallic surfaces may corrode.
■ Never clean the shelves
or containers in the dishwasher.
The parts may become deformed.
Proceed as follows:
1. Switch off the appliance.
2. Pull out the mains plug or switch off
the fuse.
3. Take out the food and store in a cool
location.
If present: place ice pack
on the food.
4. If present: wait until the layer of frost
has thawed.
5. Clean the appliance with a soft cloth,
lukewarm water and a little
pH-neutral washing-up liquid.
Caution!
The rinsing water must not run into
the light or through the drainage
hole into the evaporation area.
6. Wipe door seal with clear water and
dry thoroughly with a cloth.
7. Reconnect and switch on appliance
and put in food.
Cleaning the equipment
To clean, take the variable parts out of
the appliance.
~ "Interior fittings" on page 11
Partition and vegetable container
cover
Taking out the partition
~ Fig. ,
■ Remove glass plate, press levers on
the underside on both sides, pull
partition forwards, lift and swivel out
to the side.
Taking out the vegetable container
cover
■ Lift cover, pull forwards and swivel
out to the side.
Inserting vegetable container cover
and partition
~ Fig. .
1. Insert vegetable container cover.
2. Insert partition.
3. Insert glass plate.