User's Manual
Table Of Contents
- Double oven
- en
- Table of contents
- 1 Safety
- 2 Preventing material damage
- 3 Environmental protection and saving energy
- 4 Familiarising yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic operation
- 8 Time-setting options
- 9 Childproof lock
- 10 Rapid heating
- 11 Cleaning and servicing
- 12 Shelf supports
- 13 Appliance door
- 13.1 Detaching the lower appliance door
- 13.2 Attaching the lower appliance door
- 13.3 Removing the door panes from the lower the appliance door
- 13.4 Installing the door panes for the lower the appliance door
- 13.5 Detaching the upper appliance door
- 13.6 Attaching the upper appliance door
- 13.7 Removing the door panes from the upper the appliance door
- 13.8 Installing the door panes for the upper the appliance door
- 14 Troubleshooting
- 15 Disposal
- 16 Customer Service
- 17 How it works
- 18 Installation instructions
- 18.1 General installation instructions
- 18.2 Appliance dimensions
- 18.3 Installation below a worktop
- 18.4 Installation underneath a hob
- 18.5 Installation in a tall unit
- 18.6 Corner installation
- 18.7 Electrical connection
- 18.8 Installing the appliance in a tall unit
- 18.9 Installing the appliance under worktop
- 18.10 Removing the appliance
Installation instructions en
31
7.
The appliance must be transported by two people
using the carry handles on the right and left, while
securing the front of the appliance with one hand.
8.
Place the appliance in the unit and fold the carry
handles down.
9.
Push the appliance in fully.
Do not kink or trap the connecting cable, or route it
over sharp edges.
10.
Centre the appliance.
There must be an air gap of at least 5mm between
the appliance and adjacent unit fronts.
11.
Use a spirit level to adjust the appliance so that it is
perfectly level.
12.
Attach the brackets for the metal screws that are in
the accompanying bag to the appliance.
13.
Secure the appliance using the wooden screws sup-
plied in the cooking compartment.
18.10 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.