Instruction Manual

Cleaning function en
19
This will regenerate the ceramic coating.
When the cooking compartment has cooled down,
remove the brown or white residue with water and a soft
sponge.
Note: When the appliance is running, reddish spots
form on the surfaces. This is not rust, but residue from
food. These spots are not harmful and do not impair the
cleaning ability of the self-cleaning surfaces.
Top oven
Refer to the information in the relevant section.
~ "Cleaning function" on page 19
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
:Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
■ Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■ Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■ Use the universal pan for baking very moist cakes.
■ Use suitable ovenware for roasting, e.g. a roasting
dish.
.Cleaning function
Cl eani ng f unc t i on Your appliance comes with the EasyClean cleaning aid.
The EasyClean cleaning aid makes it easier to clean the
cooking compartment.
EasyClean
The EasyClean cleaning aid makes it easier to clean the
cooking compartment. Dirt is softened beforehand by
vaporizing soapy water. It can then be removed more
easily.
:Warning – Risk of scalding!
Water in a hot cooking compartment may create hot
steam. Never pour water into the cooking compartment
when the cooking compartment is hot.
Setting the cleaning aid
Note: Only use the EasyClean š cleaning aid when the
cooking compartment has cooled down. Allow the
cooking compartment to completely cool down.
1. Remove the accessories from the cooking
compartment.
2. Mix 0.4 litres water (not distilled water) with a drop of
washing-up liquid and pour into the middle of the
cooking compartment floor.
3. Use the function selector and temperature selector
to set EasyClean š.
The duration is shown in the display.
The cleaning aid starts after a few seconds. The
duration counts down in the display.
Notes
■ The duration is preset and cannot be changed.
■ The end time cannot be delayed.
If œ flashes in the display after switching on, the cooking
compartment has not cooled completely. Switch off the
appliance. Wait until ¬¬ appears in the display and
switch the cleaning aid on again.
Once the cleaning aid has run through to the end, an
audible signal sounds.
Subsequent cleaning
The remaining water in the cooking compartment must
be removed promptly. Do not leave the remaining water
in the cooking compartment for an extended period
(e.g. overnight). The appliance must not be operated
when the cooking compartment is still wet or damp.
1. Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2. Clean the smooth surfaces in the cooking
compartment with a dish cloth or a soft brush.
Stubborn residues can be removed using a stainless
steel scouring pad.
3. Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).