EXTRACTOR HOOD [en] Instructions for installation and use
en Ú Table of contents [ e n ] I n s t r u c t i o n s f o r i ns t a l a t i o n a n d u s e INSTRUCTION MANUAL ..........................................................3 8 Intended use ......................................................... 3 ( Important safety information .............................. 4 7 Environmental protection.................................... 6 Ç Operating modes.................................................. 6 1 Operating the appliance ....................................
en Important safety information :Warning – Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. In any case, consult your responsible Master Chimney Sweep. He is able to assess the house's entire ventilation setup and will suggest the suitable ventilation measures to you. Unrestricted operation is possible if the vapour extractor hood is operated exclusively in the circulating-air mode.
Important safety information en : Warning – Risk of injury! Causes of damage ■ Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down. Do not place any objects on the appliance.
en Environmental protection 7Environmental protection Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly. Envi r onment al pr ot ect i on ÇOperating modes Oper at i ng modes Exhaust air mode The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
Operating the appliance 1Operating the appliance These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. If your appliance has Home Connect, more functions are only available in the Home Connect app. Oper at i ng t he ap l i ance en Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking.
en Operating the appliance Fan run-on time Saturation display Switching on Touch the ( symbol while the fan is running at fan setting 1. The fan will run at fan setting 1. The fan will switch off automatically after approximately 10 minutes. If the metal grease filters or the activated charcoal filter are/is saturated, the corresponding symbols flashes after the appliance is switched off: Switching off Touch the ) symbol to select a different fan setting. This immediately stops the fan run-on.
Connecting to a hob eConnecting to a hob You can connect this appliance to a hob and then control the functions of the hood via your hob. Appliances can be connected to each other in different ways: Connecting appliances directly If the appliance is connected directly to a hob, it cannot be connected to your home network as well. The appliance works like an extractor hood that is not connected to the network and you can continue to operate it via the control panel.
en Home Connect oHome Connect This appliance can be networked and also controlled using a mobile device. If the appliance is not connected to your home network, it will function as an extractor hood with no network connection and can still be operated via the display. The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country. You can find more information on this at www.home-connect.com.
Home Connect Connecting to the app If the Home Connect app is installed on your mobile device, you can connect it to your extractor hood. Notes The appliance must be connected to the network. ■ The app must be open. ■ 1. Press and hold the # and ˜ symbols at the same time until the D and „ indicators start flashing. 2. On your mobile device, follow the instructions in the Home Connect app.
Cleaning and maintenance en 2Cleaning and maintenance :Warning – Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. Cl eani ng and mai nt enance : Warning Risk of electric shock! ■ Penetrating moisture may result in an electric shock. Clean the appliance using a damp cloth only. Before cleaning, pull out the mains plug or switch off the circuit breaker in the fuse box.
Cleaning and maintenance Cleaning the metal mesh grease filters Installing the metal mesh grease filter These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. : Warning – Risk of injury! : Warning – Risk of fire! Note: Clean all accessible parts of the housing. Fatty deposits in the grease filter may catch fire. Regularly clean the grease filter. Never operate the appliance without a grease filter.
en Trouble shooting 3Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. Tr oubl e sho t i ng : Warning – Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained after-sales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service.
Installation instructions en INSTALLATION INSTRUCTIONS Installation instructions I n s t a l a t i on i n s t r uc t i o n s HOHFWUR JD] (Important safety information Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners. Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
en Important safety information : Warning – Risk of death! Risk of poisoning from flue gases that are drawn back in. The exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft which is used to ventilate installation rooms that contain heating appliances. If the exhaust air is to be conveyed into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible.
General information : Warning – Risk of electric shock! Components inside the appliance may have sharp edges. These may damage the connecting cable. Do not kink or pinch the connecting cable during installation. Risk of electric shock! ■ It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket that has been correctly installed.
en Installation Preparing the ceiling ■ ■ ■ ■ The ceiling must be flat, horizontal and have adequate load-bearing capacity. The depth of the bore holes must be the same length as the screws. The wall plugs must have a secure grip. The enclosed screws and wall plugs are suitable for solid brickwork. Suitable fasteners must be used for other structures (e.g. plasterboard, porous concrete, poroton bricks). The max. weight of the extractor hood is 50 kg.
Installation Fitting the lower support frame Fitting the appliance Fasten the upper and lower part of the support frame at the specified total height using 10 screws. 1. Hook the appliance from below into the support Notes ■ Ensure that the lower support frame is in the correct position. The open side must be facing the hob control elements. ■ The support frame can be subsequently repositioned by loosening the securing screws. en frame. Note: Ensure that the mains cable is not trapped. 2.
en Installation Connecting the pipes Attaching the flue duct Note: If using an aluminium pipe, smooth the connection area beforehand. : Warning – Risk of injury! Exhaust-air pipe Ø 150 mm (recommended size) Attach the exhaust-air pipe directly to the air-pipe connector and seal. 1. Separate the flue ducts. Exhaust-air pipe Ø 120 mm 1. Attach the reducing connector directly to the air-pipe connector. 2. Attach the exhaust air pipe to the reducing connector. 3. Seal both joints appropriately.
6
6
6
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
