Extractor hood [en] User manual and installation instructions I96BMP5N0, I96BMP5N0B, I95BCP2N0
en Safety Table of contents INFORMATION FOR USE 1 Safety .................................................................... 2 2 Avoiding material damage................................... 4 3 Environmental protection and saving energy ....................................................................... 5 4 Operating modes ................................................. 5 5 Familiarising yourself with your appliance ........ 6 6 Basic operation .............................................
Safety WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g. gas, oil, wood or coaloperated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, air is extracted from the kitchen and the adjacent rooms.
en Avoiding material damage WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Carefully clean the appliance interior. Items placed on the appliance may fall off. ▶ Do not place any objects on the appliance. Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions. ▶ Do not make any changes to the electrical or mechanical assembly. The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1).
Environmental protection and saving energy en Painted surfaces are easily damaged. ▶ Follow the cleaning instructions. → "Cleaning the appliance", Page 7 ▶ Ensure that the painted surfaces are not scratched. 3 Environmental protection and saving energy 3.1 Disposing of packaging The packaging materials are environmentally compatible and can be recycled. ▶ Sort the individual components by type and dispose of them separately. 3.
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Switching the appliance on or off 5.2 Display Switching noise reduction on or off You can see the current setting values in the display.
Cleaning and servicing 6.10 Resetting the saturation indicator Note: The saturation indicator does not apply for nonregenerative odour filters that are inserted downstream of the grease filters. These odour filters must be replaced twice a year. Requirements ¡ After the appliance has been switched off, appears on the display for the grease filter. ¡ After the appliance has been switched off, appears on the display for the odour filter. ▶ Press . 2. Release en to save the setting.
en Cleaning and servicing 2. Clean as follows, depending on the surface: Clean stainless steel surfaces in the direction of the finish using a sponge cloth and hot soapy water. ‒ Clean painted surfaces using a damp sponge cloth and hot soapy water. ‒ Clean aluminium using a soft cloth and glass cleaner. ‒ Clean plastic using a soft cloth and glass cleaner. ‒ Clean glass using a soft cloth and glass cleaner. 3. Dry with a soft cloth. 4.
Troubleshooting en 3. If the grease filter has been inserted incorrectly, carefully push the lock forwards, remove the grease filter and insert it correctly. 8 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. WARNING ‒ Risk of injury! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff.
en Customer Service This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Installation instructions 12.1 Scope of delivery After unpacking all parts, check for any damage in transit and completeness of the delivery. 12.2 Safety clearances Comply with the safety clearances for the appliance. For Australia and New Zealand the minimum safety clearance above electrical cooktops must be 600 mm. en 12.3 Secure installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in.
en Installation instructions Risk of poisoning from flue gases being drawn back in. ▶ If an extractor hood with an open-flued heat production source is installed, the power supply for the extractor hood must be provided with a suitable safety switch. Risk of poisoning from flue gases being drawn back in. ▶ Do not emit the exhaust air into a smoke or exhaust gas flue that is in operation. ▶ Do not emit the exhaust air into a shaft that is used to ventilate installation rooms for heat-producing appliances.
Installation instructions Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk. Incorrect installation is dangerous.
en Installation instructions 12.8 Instructions for the air extraction mode For air extraction mode, a one-way flap should be installed. Notes ¡ If a one-way flap is not included with the appliance, one can be ordered from a specialist retailer. ¡ If the exhaust air is conveyed through the external wall, a telescopic duct should be used. Installing the lower support frame ▶ Attach the upper and lower section of the support frame at the specified total height using 10 screws. 12.
Installation instructions 2. Attach the appliance to the support frame using 2 securing screws. en Installing the flue duct WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Wear protective gloves. WARNING ‒ Risk of electric shock! Sharp-edged components inside the appliance may damage the connecting cable. ▶ Do not kink or trap the connecting cable. 1. To separate the flue ducts, remove the adhesive tape or the flue duct from the protective packaging. 2.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
