User's Manual
Table Of Contents
- Ceiling-mounted ventilation system
- en
- Table of contents
- 1 Safety
- 2 Preventing material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Before using for the first time
- 7 Basic operation
- 7.1 Switching on the appliance
- 7.2 Switching off the appliance
- 7.3 Selecting a fan setting
- 7.4 Switching on intensive mode
- 7.5 Switching off intensive mode
- 7.6 Switching on the fan run-on
- 7.7 Switching off the fan run-on
- 7.8 Switch on automatic mode
- 7.9 Switch off automatic mode
- 7.10 Intermittent ventilation
- 7.11 Sensor control
- 7.12 Setting the sensor control
- 7.13 Setting the saturation indicator
- 7.14 Resetting the saturation indicator
- 7.15 Switching on the lighting
- 7.16 Setting the brightness
- 7.17 Switching on the button tone
- 7.18 Switching the button tone off
- 8 Hob-based hood control
- 9 Home Connect
- 9.1 Automatically connecting the appliance to the WLAN home network (Wi-Fi)
- 9.2 Manually connecting the appliance to the WLAN home network (Wi-Fi)
- 9.3 Connecting the appliance to the Home Connect app
- 9.4 Software update
- 9.5 Resetting the connection
- 9.6 Remote diagnostics
- 9.7 Data protection
- 9.8 Declaration of Conformity
- 10 Cleaning and servicing
- 11 Troubleshooting
- 12 Customer Service
- 13 Accessories
- 14 Disposal
- 15 Installation instructions
en Installation instructions
22
10.
Undo the opposite screws to loosen the fan box.
T 20
11.
Push the fan box to the side and release the pipe-
work.
12.
Push the fan box to the other side and pull out the
mains plug.
13.
Screw the fan box firmly back in place.
14.
Loosen the mounting brackets. Push the removal
slide inwards.
15.
Slowly take the appliance out of the cutout.
16.
Insert the side covers into the corresponding open-
ings and screw them firmly in place.