Ceiling-mounted ventilation system [en] User manual and installation instructions I16RPS8S5 2
en Safety Table of contents USER MANUAL 1 Safety .................................................................... 2 2 Preventing material damage ............................... 4 3 Environmental protection and saving energy ....................................................................... 5 4 Operating modes ................................................. 5 5 Familiarising yourself with your appliance ........ 6 6 Before using for the first time .............................
Safety WARNING ‒ Risk of fire! Fatty deposits in the grease filters may catch fire. ▶ Never operate the appliance without a grease filter. ▶ Clean the grease filters regularly. ▶ Never work with naked flames close to the appliance (e.g. flambéing). ▶ Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coalburning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks. Hot oil or grease ignites very quickly.
en Preventing material damage WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box. ▶ Call customer services. → Page 13 Incorrect repairs are dangerous.
Environmental protection and saving energy en 3 Environmental protection and saving energy 3.1 Disposing of packaging The packaging materials are environmentally compatible and can be recycled. ▶ Sort the individual components by type and dispose of them separately. Information about current disposal methods are available from your specialist dealer or local authority. 3.2 Saving energy If you follow these instructions, your appliance will use less power.
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Controls Switch the fan run-on on or off Use the remote control to set all of the functions of your appliance. Tip: Align the remote control as precisely as possible to the infrared receiver for the LED display. Switch Home Connect on or off Reset the filter saturation indicator 1 Depending on the appliance specifications 5.2 LED display Die LED-Anzeige zeigt eingestellte Werte und Funktionen.
Basic operation en 7.5 Switching off intensive mode 7.11 Sensor control ▶ To select a fan setting of your choice, press In automatic mode, a sensor in the appliance detects the intensity of the cooking and roasting fumes. Depending on the setting of the sensor sensitivity, the optimum fan setting automatically switched on. If the sensor control system reacts too weakly or too strongly, the setting for the sensor sensitivity may change.
en Home Connect 7.15 Switching on the lighting ▶ Press to switch on the lighting. Note: Colour temperature settings are available in the Home Connect app provided the appliance has this function. To cancel the setting, press . 3. To save the setting, press and hold and for approx. three seconds. Or wait approx. 10 seconds until the setting is saved automatically. a A signal tone sounds as soon as the selected setting is saved. 7.
Home Connect LED display. Log the appliance manually into the home network or press in order to restart the login. 5. On your mobile device, follow the instructions for automatic network login. a The login process is complete when LED 7 stops flashing and remains continuously lit. 8.2 Manually connecting the appliance to the WLAN home network (Wi-Fi) Note: The appliance cannot be switched on during the connection process. Press to cancel the process.
en Hob-based hood control 9 Hob-based hood control You can connect your appliance to a suitable hob and, in this way, control the functions of your appliance via the hob. If both appliances are Home Connect-compatible, connect the appliances in the Home Connect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app. Notes ¡ Regular security updates are provided for your appliance.
Cleaning and servicing 1. Observe the information regarding the cleaning agents. → "Cleaning products", Page 10 2. Clean using a damp sponge cloth and hot soapy water. 3. Dry with a soft cloth. en 3. ATTENTION! Falling grease filters may damage the hob below. ▶ Grip below the grease filter with one hand. Open the locks on the grease filters. 10.8 Removing the grease filter WARNING ‒ Risk of injury! The filter cover may swing out. ▶ Open the filter cover slowly.
en Cleaning and servicing Requirement: The grease filters have been removed. → "Removing the grease filter", Page 11 1. Observe the information regarding the cleaning agents. → "Cleaning products", Page 10 2. Soak the grease filter in hot soapy water. Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop. 3. Use a brush to clean the grease filters. 4. Rinse the grease filters thoroughly. 5. Allow the grease filters to drain. 10.
Troubleshooting en 11 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. WARNING ‒ Risk of injury! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ If the appliance is defective, call Customer Service. WARNING ‒ Risk of electric shock! Improper repairs are dangerous.
en Accessories This product contains light sources from energy efficiency class F. These light sources are available as a spare part and should only be replaced by trained specialist staff. 12.1 Product number (E-Nr.) and production number (FD) You can find the product number (E-Nr.) and the production number (FD) on the appliance's rating plate. Depending on the model, the rating plate can be found: ¡ Inside the appliance (remove grease filters for access). ¡ On top of the appliance.
Declaration of Conformity en 15 Declaration of Conformity BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the basic requirements and other relevant provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.neff-international.com among the additional documents on the product page for your appliance.
en Installation instructions 16.1 Included with the appliance 16.3 Dimensions After unpacking all parts, check for any damage in transit and completeness of the delivery. You will find the dimensions of the appliance here 16.4 Secure installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children.
Installation instructions WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Wear protective gloves. The appliance may fall down if it has not been properly fastened in place. ▶ All fastening components must be fixed firmly and securely in place. The appliance is heavy. ▶ To move the appliance, two people are required. ▶ Use only suitable tools and equipment. The appliance is heavy.
en Installation instructions ¡ To optimally detect the cooking vapours, install the appliance in the middle of the hob. 16.6 Instructions for the electrical connection In order to be able to safely connect the appliance to the electrical system, follow these instructions. WARNING ‒ Risk of electric shock! It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket that has been correctly installed.
Installation instructions 2. Loosen the screws on the side covers. en 3. Guide the cable that is provided on-site through the opening and hook the appliance into the fastening screws on the ceiling. 20 3. Open the odour filter cartridge. 4. Push the appliance as far as it will go into the four key hole openings using the guide sleeves. 5. Move the appliance and lower it further so that the collar nuts are positioned on the edge of the guide sleeves. 4. Push the side covers inwards and remove them.
en Installation instructions 2. Insert the on-site cable into the terminal plug. 3. Push the side covers in the direction of the appli- ance frame and screw them firmly in place. N L 20 Installing covers WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Wear protective gloves. Risk of injury when opening and closing the hinges. ▶ Keep your hands away from the hinges. 4. Remove the new odour filter from the packaging. 5.
Installation instructions 2. Mount the filter cover on the designated screws and en 2. Press the lock on the filter cover. push it backwards/forwards depending on the key hole opening into the narrow section. To prevent the filter cover from swinging down suddenly, hold onto the filter cover firmly with two hands. 3. Open the filter cover by pulling it downwards. 3. Tighten the fastening screws on the hinges. 4. Connect the appliance-side cable for the lighting. 4. Swing down the filter cover.
en Installation instructions 8. Remove the grease filters. 14. Loosen the cable that is provided on-site from the N L terminal clamp. To avoid causing damage, do not bend the grease filters. 9. Open the odour filter cartridge. 15. Carefully loosen the diagonally opposite screws. 13 16. Disconnect the appliance from the key hole open10. Remove the odour filter. 11. Loosen the screws on the side covers. ing. 20 17. Slowly take the appliance down. 12. Remove the side covers. 13.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.