Instructions for Use

Memory en
13
BMemory
Memor y The memory function allows you to save the setting for
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.
Saving memory settings
Example: 360 W, 25 minutes
1. Press the i button.
The indicator light above the button lights up.
2. Press the required microwave power setting.
The indicator light above the button lights up and
"1:00 min" appears in the display.
3. Use the rotary selector to set the cooking time.
4. Confirm by pressing the i button.
The clock reappears. The setting has been saved.
Notes
■ You can also store grill only or grill combined with
microwave.
■ You cannot save several microwave power settings
one after the other.
■ You cannot save automatic programmes.
■ You can save the memory settings and start the
appliance immediately. When finishing, instead of
pressing i, press Start.
■ Saving a new setting in the memory: press the
ibutton. The old settings appear. Save the new
programme as described in steps 1-4.
Starting the memory
It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
1. Press the i button.
The saved settings are displayed.
2. Press the "Start" button.
The cooking time counts down in the display.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or
press "Stop". The clock reappears.
Pausing
Press the Stop button once or open the appliance door.
This pauses the appliance. The indicator above the
Stop button will light up. After closing the door, press
the Start button again.
Cancelling operation
Press the Stop button twice, or open the door and press
the Stop button once.
PProgrammes
Pr ogr ammes You can prepare food really easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 8 programmes.
Setting a programme
Once you have selected a programme, make settings
as follows:
1. Press the g button repeatedly until the required
programme number appears.
The indicator light above the button lights up.
2. Press the h button.
The indicator light above the button lights up and a
suggested value appears in the display.
3. Use the rotary selector to set the weight of the dish.
4. Press the "Start" button.
The cooking time for the programme starts counting
down.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or
press "Stop". The clock reappears.
Correction
Press the "Stop" button twice and reset.
Pausing the appliance
Touch the Stop button once or open the appliance
door. This pauses the appliance. The indicator above
 
PLQ
NJ
PLQ
 
 
PLQ
NJ
NJ