Installation Instruction

en Accessories
8
⁠ Stop or pause the operation.
⁠ Open the appliance door.
Rotary selector
Use the rotary selector to change the setting values
that are shown on the display.
The rotary selector can be pushed in. To engage or re-
lease the rotary selector, push the rotary selector.
Automatic door opener
When you press the automatic door opener, the appli-
ance door springs open. You can fully open the appli-
ance door manually.
Notes
¡ In the event of a power cut, the automatic door
opener does not work. You can open the door
manually.
¡ If you open the appliance door during operation,
this pauses the operation.
¡ When you close the appliance door, the operation
does not continue automatically. You must restart
the operation.
¡ If the appliance is switched off for an extended
period of time, the appliance door opens with a time
delay.
4.2 Types of heating
Here you can find an overview of the types of heating. You can find recommendations on using the types of heating.
Symbol Name Use
90–900 Microwave Defrosting, cooking or heating food and liquids.
⁠ Grill Gratinate food.
Microwave combined
operation
¡ Bake bakes and gratins.
¡ Brown dishes.
4.3 Cooling fan
The cooling fan switches on and off as required.
The cooking compartment remains cold during mi-
crowave operation. Despite this, the cooling fan will still
switch on.
Note:The cooling fan may run on even if the oven has
been switched off.
4.4 Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.
5 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Accessories Use
Wire rack ¡ Wire rack for grilling
and browning
¡ Use the wire rack and
place the cookware on
it
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial configuration
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
Note:After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
1.
Press ⁠.
a 12:00 is shown on the display. The indicator light
lights up via ⁠.
2.
Set the clock using the rotary selector.
3.
Press ⁠.
6.2 Heating up the cooking compartment
1.
Press ⁠.
2.
Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a
dish cloth.