Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 6.1 Switching on the appliance
- 6.2 Switching off the appliance
- 6.3 Selecting a fan setting
- 6.4 Switching on intensive mode
- 6.5 Switching off intensive mode
- 6.6 Switching on the fan run-on
- 6.7 Switching off the fan run-on
- 6.8 Switching on the NoiseReduction function
- 6.9 Switching on the AirFresh function
- 6.10 Switching on automatic mode
- 6.11 Switching off automatic mode
- 6.12 Sensor control
- 6.13 Setting the sensor control
- 6.14 Setting the saturation indicator
- 6.15 Switching on the lighting
- 6.16 Setting the brightness
- 6.17 Switching on the audible signal
- 6.18 Switching off the signal tone
- 7 Home Connect
- 8 Hob-based hood control
- 9 Cleaning and servicing
- 10 Troubleshooting
- 11 Disposal
- 12 Customer Service
- 13 Accessories
- 14 Declaration of Conformity
- 15 Installation instructions
- 15.1 Scope of delivery
- 15.2 Safety clearances
- 15.3 Secure installation
- 15.4 General information
- 15.5 Instructions for the electrical connection
- 15.6 Information on the installation situation
- 15.7 Instructions for the exhaust air pipe
- 15.8 Instructions for the air extraction mode
- 15.9 Installation
en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching noise reduction on or off
Switching the AirFresh function on or off
Decreasing the fan setting
Increasing the fan setting
Switching on intensive mode 2
Switching automatic mode on or off
Switching the lighting on or off
Setting the brightness
5.2 Display
You can see the current setting values in the display.
Noise reduction function
- Fan settings
Fan run-on
AirFresh function
HomeConnect
6 Basic operation
6.1 Switching on the appliance
▶
Press .
a The appliance starts at fan setting2.
6.2 Switching off the appliance
▶
Press .
6.3 Selecting a fan setting
▶
Press or .
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1.
To switch on intensive mode 2, press .
a appears on the display.
2.
To switch on intensive mode 1, press again.
a appears on the display.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
▶
Press .
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
▶
Press while the fan is running at fan setting 1.
a The fan run-on starts at fan setting1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
6.7 Switching off the fan run-on
▶
Press .
6.8 Switching on the NoiseReduction
function
1
The noise reduction function reduces the fan noise.
The function is possible in all fan settings, except in fan
setting .
▶
Press .
a The NoiseReduction function remains active even
after the appliance is switched off.
6.9 Switching on the AirFresh function
The AirFresh function switches on the ventilation sys-
tem for approx.five minutes per hour at fan setting1.
▶
Press .
a appears on the display.
1
Depending on the appliance specifications