Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 6.1 Switching on the appliance
- 6.2 Switching off the appliance
- 6.3 Selecting a fan setting
- 6.4 Switching on intensive mode
- 6.5 Switching off intensive mode
- 6.6 Switching on the fan run-on, variant 1
- 6.7 Switching on the fan run-on, variant 2 and 3
- 6.8 Switching off the fan run-on, variant 1
- 6.9 Switching off the fan run-on, variant 2 and 3
- 6.10 Switching on the AirFresh function
- 6.11 Switching on the NoiseReduction function
- 6.12 Switching on automatic mode
- 6.13 Switching off automatic mode
- 6.14 Sensor control
- 6.15 Setting the sensor control
- 6.16 Switching on the lighting
- 6.17 Setting the brightness
- 6.18 Switching on Ambient Light
- 6.19 Ambient Light - Setting the brightness
- 6.20 Ambient Light - adjusting the colour
- 6.21 Setting the intermediate position for the filter cover
- 6.22 Resetting the saturation indicator
- 6.23 Setting the saturation indicator
- 6.24 Switching on the signal tone
- 6.25 Switching off the signal tone
- 7 Cleaning and servicing
- 8 Troubleshooting
- 9 Disposal
- 10 Customer Service
- 11 Accessories
- 12 Installation instructions
- 12.1 Scope of delivery
- 12.2 Safety clearances
- 12.3 Appliance dimensions
- 12.4 Installation recommendation
- 12.5 Secure installation
- 12.6 Instructions for the electrical connection
- 12.7 Information on the installation situation
- 12.8 General information
- 12.9 Installation
