Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 6.1 Switching on the appliance
- 6.2 Switching off the appliance
- 6.3 Selecting a fan setting
- 6.4 Switching on intensive mode
- 6.5 Switching off intensive mode
- 6.6 Switching on the fan run-on, variant 1
- 6.7 Switching on the fan run-on, variant 2 and 3
- 6.8 Switching off the fan run-on, variant 1
- 6.9 Switching off the fan run-on, variant 2 and 3
- 6.10 Switching on the AirFresh function
- 6.11 Switching on the NoiseReduction function
- 6.12 Switching on automatic mode
- 6.13 Switching off automatic mode
- 6.14 Sensor control
- 6.15 Setting the sensor control
- 6.16 Switching on the lighting
- 6.17 Setting the brightness
- 6.18 Switching on Ambient Light
- 6.19 Ambient Light - Setting the brightness
- 6.20 Ambient Light - adjusting the colour
- 6.21 Setting the intermediate position for the filter cover
- 6.22 Resetting the saturation indicator
- 6.23 Setting the saturation indicator
- 6.24 Switching on the signal tone
- 6.25 Switching off the signal tone
- 7 Cleaning and servicing
- 8 Troubleshooting
- 9 Disposal
- 10 Customer Service
- 11 Accessories
- 12 Installation instructions
- 12.1 Scope of delivery
- 12.2 Safety clearances
- 12.3 Appliance dimensions
- 12.4 Installation recommendation
- 12.5 Secure installation
- 12.6 Instructions for the electrical connection
- 12.7 Information on the installation situation
- 12.8 General information
- 12.9 Installation
en Accessories
12
10.1 Product number (E-Nr.) and production
number (FD)
You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
Depending on the model, the rating plate can be found:
¡ Inside the appliance (remove grease filters for ac-
cess).
¡ On top of the appliance.
Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.
11 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. →Page12
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.neff-international.com
Accessories Order number
Standard circulated air
set (flat hood)
Z51AFU0X0
Standard no-flue circu-
lated air set (flat hood)
Z51AFT0X0
Standard odour filter (re-
placement, flat hood)
Z51AFA0X0
Standard circulated air
set (angled canopy hood)
Z51AIU0X0
Standard no-flue circu-
lated air set (angled can-
opy hood)
Z51AIT0X0
Standard odour filter (re-
placement, angled can-
opy hood)
Z51AIA0X0
Long Life circulated air
set (flat hood)
Z51AFS0X0
Accessories Order number
Long Life circulated air
set (angled canopy hood)
Z51AIS0X0
Long Life no-flue circu-
lated air set (flat hood)
Z51AFR0X0
Long Life no-flue circu-
lated air set (angled can-
opy hood)
Z51AIR0X0
Long Life odour filter (re-
placement)
Z50XXP0X0
Clean Air Plus circulated
air set (flat hood)
Z51AFI1X6
Clean Air Plus no-flue cir-
culated air set (flat hood)
Z51AFV1X6
Clean Air Plus circulated
air set (angled canopy
hood)
Z51AII1X6
Clean Air Plus no-flue cir-
culated air set (angled
canopy hood)
Z51AIV1X6
Clean Air Plus circulated
air set, external
Z51AXC1N6
Clean Air Plus odour filter
(replacement)
Z51AIB1X6
Clean Air Plus odour filter
(replacement, flat hood)
Z51AFB1X6
Clean Air Plus odour filter
(replacement, angled can-
opy hood)
Z53XXB1X6
12 Installation instructions
Observe this information when installing the appliance.