EXTRACTOR HOOD [en] Instructions for installation and use
en Ú Table of contents [ e n ] I n s t r u c t i o n s f o r i ns t a l a t i o n a n d u s e INSTRUCTION MANUAL ..........................................................3 8 Intended use ......................................................... 3 ( Important safety information .............................. 4 7 Environmental protection.................................... 6 Ç Operating modes.................................................. 6 1 Operating the appliance ....................................
en Important safety information (Important safety information :Warning – Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. I mpor t ant saf et y i nf or mat i on : Warning – Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room air-dependent heat-producing appliance is being operated.
Important safety information en : Warning – Risk of injury! Causes of damage : Warning – Hazard due to magnetism! Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Risk of trapping body parts when opening and closing the glass front. Do not reach into the area behind the glass panel, and keep your fingers away from the hinges. Permanent magnets are inserted in the appliance front.
en Environmental protection 7Environmental protection Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly. Envi r onment al pr ot ect i on ÇOperating modes Oper at i ng modes Exhaust air mode The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
Operating the appliance en 1Operating the appliance These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. Oper at i ng t he ap l i ance Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking. This is the most effective way of removing the kitchen fumes.
en Operating the appliance Intermediate position for the glass front Saturation display On some appliances, the glass front can be adjusted to an intermediate position. The intermediate position can be used for eliminating particularly strong cooking smells and large amounts of steam. Take hold of the glass front in the centre and open it carefully.
Operating the appliance en Control panel model 2 Symbol # Q 3 9 A @ ˜ ‘ k 6 Display Q 1-3 9 3 D Explanation Fan on/off AirFresh function Switching on Noise reduction function Touch the 3 symbol. AirFresh function Fan run-on 3 will be shown on the display panel.The fan runs for approximately 5 minutes per hour at fan setting 1. Decrease fan setting Switching off Increase fan setting/intensive mode 1, 2 Touch the 3 symbol. Intensive mode 2 shortcut This ends the AirFresh function.
en Operating the appliance Automatic mode Lighting Switching on The lighting can be switched on and off independently of the fan. 1. Touch the # symbol. The fan will start at setting ƒ. 2. Touch the ‘ symbol. The optimum fan setting is set using an automatic air sensor. Touch the 6 symbol. Switching off Saturation display Touch the ‘ or # symbol to switch off automatic mode.
Connecting to a hob eConnecting to a hob You can connect this appliance to a hob (if the hob supports connection to the appliance) and then control the functions of the hood via your hob. Appliances can be connected to each other in different ways: Home Connect Two appliances can be connected using the Home Connect app provided that both of them are Home Connect compatible. Refer to the Home Connect documents supplied for more information.
en Home Connect oHome Connect This appliance can be networked and also controlled using a mobile device. If the appliance is not connected to your home network, it will function as an extractor hood with no network connection and can still be operated via the display. The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country. You can find more information on this at www.home-connect.com.
Home Connect Connecting to the app If the Home Connect app is installed on your mobile device, you can connect it to your extractor hood. Notes The appliance must be connected to the network. ■ The app must be open. ■ # and ˜ symbols at the same time until the D and „ indicators start flashing. 2. On your mobile device, follow the instructions in the Home Connect app. The connection process is complete when the D indicator stops flashing on the control panel and remains continuously lit.
en Cleaning and maintenance 2Cleaning and maintenance :Warning – Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. Cl eani ng and mai nt enance : Warning – Risk of injury! Items placed on the appliance may fall off. Before opening the appliance, remove any items placed on the shelf. : Warning – Risk of electric shock! Penetrating moisture may result in an electric shock. Clean the appliance using a damp cloth only.
Trouble shooting Notes Do not use aggressive, acidic or alkaline cleaning products. ■ We recommend cleaning the grease filters every 2 months. ■ When cleaning the metal grease filters, also clean the metal grease filter holder in the appliance using a damp cloth. ■ The metal grease filters can be cleaned in the dishwasher or by hand. ■ By hand: Note: . You can use a special degreaser to remove stubborn dirt. This can be ordered from the online shop. ■ ■ ■ Soak the metal grease filters in hot soapy water.
Customer service en 4Customer service Accessories When calling us, please quote the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. These numbers can be found on the rating plate on the top of the appliance. Note: These instructions apply to several appliance models. It may be the case that an optional accessory that is listed does not apply for your appliance. Cust omer ser vi ce ( 1U )' = 1U 7\SH You can make a note of the number
Installation instructions en INSTALLATION INSTRUCTIONS I nst al at i on i nst r uct i onsInstallation instructions ■ ■ ■ ■ This appliance is installed on the wall. If the extractor hood is to be operated in exhaust-air mode, a flue duct must be fitted. If the extractor hood is to be operated in airrecirculation mode, an optional accessory must be fitted. To do this, refer to the installation instructions provided.The flue duct does not need to be fitted for air-recirculation mode.
en Important safety information Note: We recommend fitting the appliance such that the lower edge of the glass screen is in line with the lower edges of the adjacent wall-hung cabinets. Make sure that the specified safety clearances from the hob are complied with. (Important safety information Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
Important safety information : Warning – Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room airdependent heat-producing appliance is being operated. en : Warning – Danger of death! Risk of poisoning from flue gases that are drawn back in.
en General information : Warning – Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained aftersales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service. KGeneral information Gener al i nf or mat i on Checking the wall ■ ■ : Warning – Danger of suffocation! Packaging material is dangerous to children.
Installation 5Installation I n s t a l a t i on en $ Preparing for installation Caution! Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes are to be drilled. If the extractor hood is to be operated in exhaust-air mode, a flue duct must be fitted. If the extractor hood is to be operated in air-recirculation mode, an optional accessory must be fitted. To do this, refer to the installation instructions provided.
en Installation Fitting with a flue duct $ PP PP Fitting without a flue duct $ [ PP [ PP PP PP PP PP PP % PP PP % PP PP [ [ PP PP PP PP Installation PP PP PP Screw in the mounting supports for the extractor hood until they are hand-tight, use a spirit level to level the appliance and then screw the mounting supports in fully.
Installation Wall-mounting the appliance and levelling it 1. First remove the protective film from the back of the appliance and, following installation, remove the rest of the film. 2. When mounting the appliance, ensure that it engages properly with the mounting supports. 3. If required, the appliance can be moved to the right or to the left. 4. Firmly tighten the screws for the mounting supports. Hold the bracket firmly when doing so.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
