Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 6.1 Switching on the appliance
- 6.2 Switching off the appliance
- 6.3 Setting a fan setting
- 6.4 Switching on intensive mode
- 6.5 Switching off intensive mode
- 6.6 Switching on the fan run-on
- 6.7 Switching off the fan run-on
- 6.8 Switching on the AirFresh function
- 6.9 Switching on the NoiseReduction function
- 6.10 Sensor control
- 6.11 Setting the sensor control
- 6.12 Switching on the lighting
- 6.13 Setting the brightness
- 6.14 Switching on Ambient Light
- 6.15 Ambient Light - Setting the brightness
- 6.16 Ambient Light - adjusting the colour
- 6.17 Setting the intermediate position for the filter cover
- 6.18 Switching on the audible signal
- 7 Home Connect
- 8 Hob-based hood control
- 9 Cleaning and servicing
- 10 Troubleshooting
- 11 Disposal
- 12 Customer Service
- 13 Accessories
- 14 Declaration of Conformity
- 15 Installation instructions
en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Controls, variant 1
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching noise reduction on or off
Switching the AirFresh function on or off
Decreasing the fan setting
Increasing the fan setting
Switching intensive modes on or off
Switching the lighting on or off
Setting the brightness
5.2 Controls, variant 2
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching noise reduction on or off
Switching the AirFresh function on or off
Decreasing the fan setting
Increasing the fan setting
Switching intensive modes on or off
Switching Ambient Light on or off
Switching the lighting on or off
Setting the brightness
5.3 Display
You can see the current setting values in the display.
Noise reduction function
- Fan settings
Fan run-on
AirFresh function
Hob-based hood control
6 Basic operation
6.1 Switching on the appliance
▶
Press .
a The appliance starts at fan setting2.
6.2 Switching off the appliance
▶
Press .
6.3 Setting a fan setting
▶
Press or .
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1.
To switch on intensive mode 2, press .
a appears on the display.