Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 7 Cleaning and servicing
- 8 Troubleshooting
- 9 Disposal
- 10 Customer Service
- 11 Accessories
- 12 Installation instructions
en Installation instructions
10
Accessories Order number
Standard no-flue circu-
lated air set (angled can-
opy hood)
Z51AIT0X0
Standard odour filter (re-
placement, angled can-
opy hood)
Z51AIA0X0
Long Life circulated air
set (flat hood)
Z51AFS0X0
Long Life circulated air
set (angled canopy hood)
Z51AIS0X0
Long Life no-flue circu-
lated air set (flat hood)
Z51AFR0X0
Long Life no-flue circu-
lated air set (angled can-
opy hood)
Z51AIR0X0
Long Life odour filter (re-
placement)
Z50XXP0X0
Clean Air Plus circulated
air set (flat hood)
Z51AFI1X6
Accessories Order number
Clean Air Plus no-flue cir-
culated air set (flat hood)
Z51AFV1X6
Clean Air Plus circulated
air set (angled canopy
hood)
Z51AII1X6
Clean Air Plus no-flue cir-
culated air set (angled
canopy hood)
Z51AIV1X6
Clean Air Plus circulated
air set, external
Z51AXC1N6
Clean Air Plus odour filter
(replacement)
Z51AIB1X6
Clean Air Plus odour filter
(replacement, flat hood)
Z51AFB1X6
Clean Air Plus odour filter
(replacement, angled can-
opy hood)
Z53XXB1X6
12 Installation instructions
Observe this information when installing the appliance.
12.1 Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
12.2 Safety clearances
Comply with the safety clearances for the appliance.
For Australia and New Zealand the minimum safety
clearance above electrical cooktops must be 600 mm.