Extractor hood [en] User manual and installation instructions D65FRM1S0B, D65FRM1S0, D95FRM1H0, D95FRM1G0B, D95FRM1G0, D95FRM1S0B, D95FRM1S0
en Safety Table of contents Do not use the appliance: ¡ in combination with a gas hob. ¡ With an external timer. INFORMATION FOR USE 1.3 Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Children must not play with the appliance.
Safety WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g. gas, oil, wood or coaloperated heaters, continuous flow heaters or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, air is extracted from the kitchen and the adjacent rooms.
en Avoiding material damage The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1). ▶ Do not look directly into the switched-on LED lights for longer than 100 seconds. WARNING ‒ Danger: Magnetism! The appliance contains permanent magnets. They may affect electronic implants, e.g. pacemakers or insulin pumps. ▶ Persons with electronic implants must stand at least 10 cm away from the appliance.
Environmental protection and saving energy en Intense build-up of heat may cause damage. ▶ Do not place heat-sensitive devices or objects on the shelf. 3 Environmental protection and saving energy 3.1 Disposing of packaging The packaging materials are environmentally compatible and can be recycled. ▶ Sort the individual components by type and dispose of them separately. Information about current disposal methods are available from your specialist dealer or local authority. 3.
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Controls Switching the appliance on or off You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Switching on fan setting 1 Switching on fan setting 2 Switching on fan setting 3 Switching intensive mode on or off Switching the lighting on or off 6 Basic operation 6.1 Switching on the appliance 6.
Cleaning and servicing 7.2 Cleaning the appliance Clean the appliance as specified. This will ensure that the different parts and surfaces of the appliance are not damaged by incorrect cleaning or unsuitable cleaning products. WARNING ‒ Risk of explosion! Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents.
en Troubleshooting Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop. 3. Start the dishwasher. Select a temperature of no more than 70 °C. 4. Allow the grease filters to drain. 2. The lock on the grease filter clicks into place. 7.6 Cleaning grease filters manually The grease filters filter the grease from the cooking vapour. Regularly cleaned grease filters guarantee a high level of grease removal.
Disposal Fault The LED lighting does not work. The button illumination does not work. en Cause and troubleshooting Different causes are possible. ▶ Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only. ▶ Call the after-sales service. → "Customer Service", Page 9 The control unit is faulty. ▶ Call the after-sales service. → "Customer Service", Page 9 9 Disposal Find out here how to dispose of old appliances correctly. 9.
en Installation instructions Accessories Standard no-flue circulated air set (angled canopy hood) Standard odour filter (replacement, angled canopy hood) Long Life circulated air set (flat hood) Long Life circulated air set (angled canopy hood) Long Life no-flue circulated air set (flat hood) Long Life no-flue circulated air set (angled canopy hood) Long Life odour filter (replacement) Clean Air Plus circulated air set (flat hood) Order number Z51AIT0X0 Z51AIA0X0 Z51AFS0X0 Z51AIS0X0 Z51AFR0X0 Z51AIR0X0
Installation instructions 12.3 Appliance dimensions You will find the dimensions of the appliance here 12.4 Installation recommendation We recommend fitting the appliance such that the lower edge of the glass screen is in line with the lower edges of the adjacent wall-hung cabinets. B en 12.5 Secure installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in.
en Installation instructions Risk of poisoning from flue gases being drawn back in. ▶ If an extractor hood with an open-flued heat production source is installed, the power supply for the extractor hood must be provided with a suitable safety switch. Risk of poisoning from flue gases being drawn back in. ▶ Do not emit the exhaust air into a smoke or exhaust gas flue that is in operation. ▶ Do not emit the exhaust air into a shaft that is used to ventilate installation rooms for heat-producing appliances.
Installation instructions WARNING ‒ Risk of electric shock! Sharp-edged components inside the appliance may damage the connecting cable. ▶ Do not kink or trap the connecting cable. If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
en Installation instructions 12.8 General information Follow these general instructions during the installation. ¡ For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers. ¡ When discharging the exhaust air, the official and legal regulations, such as the regional building code., must be observed. ¡ In order to freely access the appliance for servicing, select an easy-to-reach installation site.
Installation instructions 4. Tighten the safety screws. en 5. Note: To prevent scratches, lay soft towels over the edges of the outer flue duct to protect the surface. Place the lower flue duct on the appliance and pull it slightly apart. 6. Put the lower flue duct over the upper flue duct. When you install a flue cover, install the bracket and hold it in place while screwing it in tight.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
