Dunstabzugshaube [de]
en Ú Table of contents INSTRUCTION MANUAL.......................................................... 2 INSTALLATION INSTRUCTIONS .......................................... 20 8 Intended use................................................................... 2 ( Important safety information ........................................ 3 7 Environmental protection ............................................. 5 Ç Operating modes ...........................................................
Important safety information en (Important safety information :Warning Danger of suffocation! Packaging material is dangerous to children. Never allow children to play with packaging material. I mpor t ant saf et y i nf or mat i on : Warning Danger of death! Risk of poisoning from flue gases that are drawn back in. Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as room airdependent heat-producing appliance is being operated.
en Important safety information : Warning Risk of burns! The accessible parts become very hot when in operation. Never touch hot parts. Keep children at a safe distance. : Warning Risk of injury! ■ Components inside the appliance may have sharp edges. Wear protective gloves. Risk of injury! ■ Items placed on the appliance may fall down. Do not place any objects on the appliance. Risk of injury! ■ The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1).
Environmental protection 7Environmental protection Your new appliance is particularly energy-efficient. Here you can find tips on how to save even more energy when using the appliance, and how to dispose of your appliance properly. Envi r onment al pr ot ect i on en ÇOperating modes Oper at i ng modes Exhaust air mode The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
Operating the appliance en 1Operating the appliance These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. Oper at i ng t he ap l i ance Note: . Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking. This is the most effective way of removing the kitchen fumes.
Operating the appliance en Intensive setting Saturation display You can use the intensive setting if there is a large build-up of odours and fumes/vapours. If the metal grease filters or activated charcoal filter are/ is saturated, the corresponding symbols will flash once the appliance has been switched off: Switching on Touch the ˜ symbol. ˜ƒ will light up on the display. Touch the ˜ symbol again to switch back to intensive mode ˜‚. Note: After approx.
Operating the appliance en Control panel model 2 Symbol # Q 3 A @ ˜ k 6 Explanation Fan on/off AirFresh function Switching on Noise reduction function Touch the 3 symbol. AirFresh function 3 will be shown on the display panel.The fan runs for Reduce fan setting/fan run-on approximately 5 minutes per hour at fan setting 1. Increase fan setting/intensive mode 1, 2 Switching off Intensive mode 2 shortcut Touch the 3 symbol. AmbientLight This ends the AirFresh function.
Operating the appliance en AmbientLight The AmbientLight can be switched on and off independently of the fan. Switching over the display for air recirculation mode For air recirculation mode, the electronic controller must be switched over accordingly: Touch the k symbol. ■ Setting the brightness ■ Press and hold the k symbol until the required brightness is reached. Setting the colour 1. Switch off the fan. 2. Touch the k symbol. ■ The @ and A symbols will be lit for approximately 10 seconds. 3.
Operating the appliance en Control panel model 3 Symbol # Q 3 A @ ˜ 9 6 Explanation Fan on/off AirFresh function Switching on Noise reduction function Touch the 3 symbol. AirFresh function 3 will be shown on the display panel.The fan runs for Decrease fan setting approximately 5 minutes per hour at fan setting 1. Increase fan setting/intensive mode 1, 2 Switching off Intensive mode 2 shortcut Touch the 3 symbol. Fan run-on This ends the AirFresh function.
Operating the appliance en Lighting Audible signal The lighting can be switched on and off independently of the fan. Switching on Touch the 6 symbol. Setting the brightness Press and hold the 6 symbol until the required brightness is reached.
Operating the appliance en Control panel variant 4 Symbol # Q 3 A @ ˜ k 6 Explanation Fan on/off AirFresh function Switching on Noise reduction function Touch the 3 symbol. AirFresh function 3 will be shown on the display panel.The fan runs for Reduce fan setting/fan run-on approximately 5 minutes per hour at fan setting 1. Increase fan setting/intensive mode 1, 2 Switching off Intensive mode 2 shortcut Touch the 3 symbol. AmbientLight This ends the AirFresh function.
Operating the appliance en AmbientLight The AmbientLight can be switched on and off independently of the fan. Switching over the display for air recirculation mode For air recirculation mode, the electronic controller must be switched over accordingly: Touch the k symbol. ■ Setting the brightness ■ Press and hold the k symbol until the required brightness is reached. Setting the colour 1. Switch off the fan. 2. Touch the k symbol. ■ The @ and A symbols will be lit for approximately 10 seconds. 3.
Operating the appliance en Control panel variant 5 Symbol # Q 3 A @ ˜ ‘ 6 Explanation Fan on/off AirFresh function Switching on Noise reduction function Touch the 3 symbol. AirFresh function 3 will be shown on the display panel.The fan runs for Reduce fan setting/fan run-on approximately 5 minutes per hour at fan setting 1. Increase fan settings/intensive mode 1, 2 Switching off Intensive mode 2 shortcut Touch the 3 symbol. Automatic air sensor This ends the AirFresh function.
Operating the appliance en Automatic mode Saturation display Switching on If the metal grease filters or activated charcoal filter are/ is saturated, the corresponding symbols will flash once the appliance has been switched off: 1. Touch the # symbol. The fan will start at setting ƒ. 2. Touch the ‘ symbol. The optimum fan setting is set using an automatic air sensor. Switching off Touch the ‘ or # symbol to switch off automatic mode.
en Cleaning and maintenance 2Cleaning and maintenance Note: Follow all instructions and warnings included with the cleaning products. :Warning Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. Area Stainless steel Cl eani ng and mai nt enance : Warning Risk of electric shock! Penetrating moisture may result in an electric shock. Clean the appliance using a damp cloth only.
Cleaning and maintenance Cleaning the metal mesh grease filters Installing the metal mesh grease filter These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance. : Warning : Warning Risk of fire! Fatty deposits in the grease filter may catch fire. Regularly clean the grease filter. Never operate the appliance without a grease filter. Notes Do not use aggressive, acidic or alkaline cleaning products.
en Trouble shooting 3Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. Tr oubl e sho t i ng : Warning Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained after-sales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service.
Customer service en Accessories (not included in the scope of delivery) Note: These instructions apply to several appliance models. It may be the case that an optional accessory that is listed does not apply for your appliance. Note: Observe the installation instructions in the accessory.
Customer service en INSTALLATION INSTRUCTIONS $ Installation instructions ■ ■ ■ ■ This appliance is installed on the wall. If the extractor hood is to be operated in exhaust-air mode, a flue duct must be fitted. If the extractor hood is to be operated in airrecirculation mode, an optional accessory must be fitted. To do this, refer to the installation instructions provided.The flue duct does not need to be fitted for air-recirculation mode.
Important safety information Note: We recommend fitting the appliance such that the lower edge of the glass screen is in line with the lower edges of the adjacent wall-hung cabinets. Make sure that the specified safety clearances from the hob are complied with. en (Important safety information Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
en Important safety information : Warning Risk of death! Risk of poisoning from flue gases that are drawn back in. The exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft which is used to ventilate installation rooms that contain heating appliances. If the exhaust air is to be conveyed into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible.
General information en : Warning Risk of electric shock! ■ Components inside the appliance may have sharp edges. These may damage the connecting cable. Do not kink or pinch the connecting cable during installation. Risk of electric shock! ■ It must always be possible to disconnect the appliance from the power supply. The appliance must only be connected to a protective contact socket that has been correctly installed.
en Installation 5Installation I ns t al at i on $ Preparing for installation Caution! Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes are to be drilled. If the extractor hood is to be operated in exhaust-air mode, a flue duct must be fitted. If the extractor hood is to be operated in air-recirculation mode, an optional accessory must be fitted. To do this, refer to the installation instructions provided.
Installation Fitting with a flue duct $ PP PP en Fitting without a flue duct $ [ PP [ PP PP PP PP PP PP % PP PP % PP PP [ [ PP PP PP PP Installation PP PP PP Screw in the mounting supports for the extractor hood until they are hand-tight, use a spirit level to level the appliance and then screw the mounting supports in fully.
en Installation Wall-mounting the appliance and levelling it Attaching the flue duct 1. First remove the protective film from the back of the If the extractor hood is to be operated in exhaust-air mode, a flue duct must be fitted. The flue duct does not need to be fitted for airrecirculation mode. appliance and, following installation, remove the rest of the film. 2. When mounting the appliance, ensure that it engages properly with the mounting supports. 3.
Installation en 6. Screw the flue duct section to the sides of the retaining bracket using two screws. © 7. Clip the lower flue duct section in at the retaining bracket. The connection cable must not be damaged. ª Note: If an air-recirculation optional accessory has been fitted and the extractor hood is to be operated without a flue duct, the cable must be wound onto the connector.
*9001159981* Constructa-Neff Vertriebs-GmbH Carl-Wery-Straße 34 81739 München GERMANY 9001159981 970606 de
