Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 6.1 Switching on the appliance
- 6.2 Switching off the appliance
- 6.3 Selecting a fan setting
- 6.4 Switching on intensive mode
- 6.5 Switching off intensive mode
- 6.6 Switching on the fan run-on, variant 1
- 6.7 Switching on the fan run-on, variant 2
- 6.8 Switching off the fan run-on, variant 1
- 6.9 Switching off the fan run-on, variant 2
- 6.10 Switching on the AirFresh function
- 6.11 Switching on the NoiseReduction function
- 6.12 Switching on automatic mode
- 6.13 Switching off automatic mode
- 6.14 Sensor control
- 6.15 Setting the sensor control
- 6.16 Switching on the lighting
- 6.17 Setting the brightness
- 6.18 Switching on Ambient Light
- 6.19 Ambient Light - Setting the brightness
- 6.20 Ambient Light - adjusting the colour
- 6.21 Setting the intermediate position for the filter cover
- 6.22 Resetting the saturation indicator
- 6.23 Setting the saturation indicator
- 6.24 Switching on the signal tone
- 6.25 Switching off the signal tone
- 7 Cleaning and servicing
- 8 Troubleshooting
- 9 Disposal
- 10 Customer Service
- 11 Accessories
- 12 Installation instructions
- 12.1 Scope of delivery
- 12.2 Safety clearances
- 12.3 Appliance dimensions
- 12.4 Installation recommendation
- 12.5 Secure installation
- 12.6 Instructions for the electrical connection
- 12.7 Information on the installation situation
- 12.8 General information
- 12.9 Installation
en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Controls, variant 1
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance
on or off
Decreasing the fan setting
Increasing the fan setting
Switching intensive mode
on or off
Switching the fan run-on
on or off
Switching the AirFresh
function on or off
Switching noise reduction
on or off
Switching the lighting on
or off
Setting the brightness
5.2 Controls, variant 2
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance
on or off
Decreasing the fan setting
Switching on the fan run-
on
Increasing the fan setting
Switching intensive mode
on or off
Switching the AirFresh
function on or off
Switching noise reduction
on or off
Switching Ambient Light
on or off
Switching the lighting on
or off
Setting the brightness
6 Basic operation
6.1 Switching on the appliance
▶
Press .
a The appliance starts at fan setting2.
6.2 Switching off the appliance
▶
Press .
6.3 Selecting a fan setting
▶
Press or .